Umich balloons processor
EricAndrechek·umich-balloons·balloon-tracker/hardware/umich_balloons_processor/umich_balloons_processor.kicad_pcb
About the Umich balloons processor PCB
Umich balloons processor is an open source ESP32 PCB design by EricAndrechek, published on GitHub. It is a 2-layer board measuring 66 × 53.3 mm, with 4 components from 4 distinct parts.
Its main chip is the TPS63070, from the ESP32 family. By type, the board carries 2 connectors, 1 IC and 1 capacitor.
It belongs with the rf & radio designs in this gallery.
From the project
An open-source, modular, Arduino-based tracking system (designed for use on high-altitude weather balloons) with LoRa, APRS, Iridium RockBLOCKs, and cellular data transmission capabilities to a mapping server, ground stations, and vehicle trackers.
Main components on the Umich balloons processor
Umich balloons processor bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS63070 ~ | esp32_feather_v2 | U1 |
| 1 | Conn_01x02 | JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J1 |
| 1 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | 0.1UF 2.2 µF | CP_Radial_D5.0mm_P2.00mm | C1 |
Umich balloons processor design files
The KiCad project lives in the EricAndrechek/umich-balloons repository on GitHub; these links point at the commit this page was built from.
Umich balloons processor: common questions
What microcontroller does the Umich balloons processor use?
The Umich balloons processor is built around the TPS63070, from the ESP32 family.
How big is the Umich balloons processor PCB?
The Umich balloons processor measures 66 × 53.3 mm, has 2 copper layers and is 1.69 mm thick.
How many components are on the Umich balloons processor?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Umich balloons processor design files?
From the EricAndrechek/umich-balloons repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Umich balloons processor design in my own project?
The repository has no license, so all rights stay with EricAndrechek. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Umich balloons processor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in umich-balloons
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k