Umich balloons external
EricAndrechek·umich-balloons·balloon-tracker/hardware/umich_balloons_external/umich_balloons_external.kicad_pcb
About the Umich balloons external PCB
Umich balloons external is an open source PCB design by EricAndrechek, published on GitHub. It is a 2-layer board measuring 50.3 × 17.8 mm, with 6 components from 4 distinct parts.
By type, the board carries 2 diodes, 2 resistors, 1 connector and 1 switch.
It belongs with the rf & radio designs in this gallery.
From the project
An open-source, modular, Arduino-based tracking system (designed for use on high-altitude weather balloons) with LoRa, APRS, Iridium RockBLOCKs, and cellular data transmission capabilities to a mapping server, ground stations, and vehicle trackers.
Umich balloons external bill of materials (BOM)
6 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x05 | JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | SW_Push_SPDT | PC712A | SW1 |
| 2 | LED | LED_D5.0mm | D1, D2 |
| 2 | 10K R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
Umich balloons external design files
The KiCad project lives in the EricAndrechek/umich-balloons repository on GitHub; these links point at the commit this page was built from.
Umich balloons external: common questions
How big is the Umich balloons external PCB?
The Umich balloons external measures 50.3 × 17.8 mm, has 2 copper layers and is 1.69 mm thick.
How many components are on the Umich balloons external?
6 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Umich balloons external design files?
From the EricAndrechek/umich-balloons repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Umich balloons external design in my own project?
The repository has no license, so all rights stay with EricAndrechek. Use it as a reference, and ask the author before reusing the design.
More boards in umich-balloons
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568