Esp32wroomOled V01
erkanCil·esp32wroomOled_V01·esp32wroomOled_V01/esp32wroomOled_V01.kicad_pcb
About the Esp32wroomOled V01 PCB
Esp32wroomOled V01 is an open source ESP32 PCB design by erkanCil, published on GitHub. It is a 2-layer board measuring 47.5 × 56.8 mm, with 60 components from 27 distinct parts.
Its main chip is the ESP-32S, from the ESP32 family. Other key parts include the MCP73811_2, CP2104 and AP2112-3V3. By type, the board carries 20 capacitors, 17 resistors, 4 ICs, 4 connectors, 3 transistors and 2 switches.
From the project
esp32wroomOled_V01 kiCaD files
Main components on the Esp32wroomOled V01
Esp32wroomOled V01 bill of materials (BOM)
60 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73811_2 | sot23-5 | IC1 |
| 1 | ESP-32S | ESP32-WROOM | U1 |
| 1 | CP2104 | QFN-24-1EP_4x4mm_Pitch0.5mm | U2 |
| 1 | AP2112-3V3 | sot23-5 | U3 |
| 1 | DMG2307L | sot23 | Q1 |
| 2 | MMBT3904 | SOT-23 | Q2, Q3 |
| 1 | USB_B_Mini | USB_Micro-B_10103594-0001LF | J1 |
| 2 | Conn_01x17 | pin_strip_17 | J2, J3 |
| 1 | JST_2MM_MALE | df13-2p-125ds | J4 |
| 6 | SW_PUSH | Tact_Switch_Top_PTS820 | BTNA1, BTNB1, BTNC1, BTND1, BTN_EVET1, BTN_HAYIR1 |
| 1 | SW_Push_SPDT | switch_mmp122-r | SW7 |
| 1 | RESET | Tact_Switch_Top_PTS820 | SW8 |
| 1 | SSD1306-096OLED | SSD1306-096OLED | DS1 |
| 1 | LED_ALT | LED_0805 | LED1 |
| 1 | MBR0520 | D_SOD-123 | D1 |
| 1 | 1N4148 | sod323 | D2 |
| 5 | 10uF | c_0603 | C1, C2, C3, C4, C5 |
| 11 | 1uF | c_0603 | C6, C10, C11, C12, C13, C15, C19, C20 +3 |
| 2 | 2u2 | c_0603 | C14, C17 |
| 1 | 4u7 | c_0603 | C16 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100n | c_0603 | C18 |
| 4 | 100K | r_0603 | R1, R2, R14, R15 |
| 1 | 4K7 | r_0603 | R3 |
| 1 | 1K | r_0603 | R4 |
| 7 | 10K | r_0603 | R5, R6, R7, R8, R10, R12, R16 |
| 2 | 470 | r_0603 | R9, R17 |
| 2 | 390K | r_0603 | R11, R13 |
Esp32wroomOled V01 design files
The KiCad project lives in the erkanCil/esp32wroomOled_V01 repository on GitHub; these links point at the commit this page was built from.
Esp32wroomOled V01: common questions
What microcontroller does the Esp32wroomOled V01 use?
The Esp32wroomOled V01 is built around the ESP-32S, from the ESP32 family.
How big is the Esp32wroomOled V01 PCB?
The Esp32wroomOled V01 measures 47.5 × 56.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32wroomOled V01?
60 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32wroomOled V01 design files?
From the erkanCil/esp32wroomOled_V01 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Esp32wroomOled V01 design in my own project?
The repository has no license, so all rights stay with erkanCil. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32wroomOled V01 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k