Wifi receiver transmitter
About the Wifi receiver transmitter PCB
Wifi receiver transmitter is an open source ESP8266 PCB design by Eryk-Mozdzen, published on GitHub. It is a 2-layer board measuring 38 × 38 mm, with 27 components from 11 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the LM1117-3.3 and CH340C. By type, the board carries 9 resistors, 7 capacitors, 4 connectors, 3 ICs, 2 transistors and 2 switches.
It belongs with the iot & wireless designs in this gallery.
From the project
Single rotor, thrust vector controlled UAV
Main components on the Wifi receiver transmitter
Wifi receiver transmitter bill of materials (BOM)
27 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-12E | ESP-12E | U1 |
| 1 | LM1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 2 | Q_NPN_EBC | SOT-23 | Q1, Q2 |
| 1 | USB_B_Micro | usb_micro_B_druk_II | J1 |
| 2 | Conn_01x04 | tht_pin_01x04 | J2, J3 |
| 1 | Conn_01x06 | tht_pin_01x06 | J4 |
| 2 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 4 | 100n | C_0603_1608Metric | C1, C4, C6, C7 |
| 3 | 4u7 | CP_EIA-3216-18_Kemet-A | C2, C3, C5 |
| 9 | 4k7 | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
Wifi receiver transmitter design files
The KiCad project lives in the Eryk-Mozdzen/uav-tvc-goose repository on GitHub; these links point at the commit this page was built from.
Wifi receiver transmitter: common questions
What microcontroller does the Wifi receiver transmitter use?
The Wifi receiver transmitter is built around the ESP-12E, from the ESP8266 family.
How big is the Wifi receiver transmitter PCB?
The Wifi receiver transmitter measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wifi receiver transmitter?
27 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wifi receiver transmitter design files?
From the Eryk-Mozdzen/uav-tvc-goose repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Wifi receiver transmitter design in my own project?
The repository has no license, so all rights stay with Eryk-Mozdzen. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Wifi receiver transmitter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in uav-tvc-goose
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398