HardLabs

ElasticAI.hardware (ENV6.mini)

es-ude·elasticai.hardware·v6/mini/mini.kicad_pcb

ElasticAI.hardware (ENV6.mini) PCB layout, top view — open source RP2040/RP2350 board by es-ude

About the ElasticAI.hardware (ENV6.mini) PCB

ElasticAI.hardware (ENV6.mini) is an open source RP2040/RP2350 PCB design by es-ude, published on GitHub under the MIT license. It is a 4-layer board measuring 51 × 23 mm, with 62 components from 20 distinct parts.

Its main chip is the RP2350A, from the RP2040/RP2350 family. Other key parts include the PAC1954T-E4Mx, TLV73312PDBV, PMOD, ICE40UP5K-SG48ITR50 and W25Q16JVUXIQ. By type, the board carries 25 capacitors, 22 resistors, 8 ICs, 2 switches, 2 diodes and 1 crystal.

From the project

Schematics and Board design for ElasticNodeHardware

Before you start using the ENv5, please read the following documents accordingly: - ENv5 Test Version User Manual - ENv5 Revision 1 User Manual

Troubleshooting - When you notice the esp32 is not responding to the RP2040, you can apply the pre-build firmware to test. - some descriptions about the behavior of the test are available here.

Main components on the ElasticAI.hardware (ENV6.mini)

PAC1954T-E4MxTLV73312PDBVPMODICE40UP5K-SG48ITR50W25Q16JVUXIQRP2350ATLV73333PDBV

ElasticAI.hardware (ENV6.mini) bill of materials (BOM)

62 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PAC1954T-E4Mx
U1
1
TLV73312PDBV
U2
1
PMOD
U4
1
ICE40UP5K-SG48ITR50
U5
2
W25Q16JVUXIQ
U6, U7
1
RP2350A
U8
1
TLV73333PDBV
U9
1
ABM8G-25.000MHZ-18-D2Y-T3
KX7_12M
Abracon
Y1
1
USB-C Receptable (16P)
J1
1
~{BOOT}
S1
1
~{RST}
S2
1
LED_0603
D1
1
WS2812B
D2
1
3µ3
L1
23
10u
C1, C2, C3, C4, C5, C6, C7, C8 +15
2
16p
C24, C25
4
1R
R1, R2, R3, R12
2
27R4
R4, R6
13
5k1
R5, R7, R8, R17, R18, R19, R20, R21 +5
3
750R
R9, R16, R23

ElasticAI.hardware (ENV6.mini) design files

The KiCad project lives in the es-ude/elasticai.hardware repository on GitHub; these links point at the commit this page was built from.

ElasticAI.hardware (ENV6.mini): common questions

What microcontroller does the ElasticAI.hardware (ENV6.mini) use?

The ElasticAI.hardware (ENV6.mini) is built around the RP2350A, from the RP2040/RP2350 family.

How big is the ElasticAI.hardware (ENV6.mini) PCB?

The ElasticAI.hardware (ENV6.mini) measures 51 × 23 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ElasticAI.hardware (ENV6.mini)?

62 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ElasticAI.hardware (ENV6.mini) design files?

From the es-ude/elasticai.hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ElasticAI.hardware (ENV6.mini) design in my own project?

Yes, under the terms of its MIT license, which es-ude chose for the repository.

Can I test firmware for the ElasticAI.hardware (ENV6.mini) without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in elasticai.hardware

Similar boards