Hdmilight v3
esar·hdmilight-v3·board/hdmilight-v3.kicad_pcb
About the Hdmilight v3 PCB
Hdmilight v3 is an open source STM32 PCB design by esar, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 100 × 100 mm, with 249 components from 68 distinct parts.
Its main chip is the STM32F303RETX, from the STM32 family. Other key parts include the 93CxxB, FT2232D, ADV7611, XC6SLX9-TQG144 and TPD12S520. By type, the board carries 118 capacitors, 71 resistors, 14 connectors, 12 ICs, 12 inductors and 9 diodes.
From the project
HDMI Light v3 - FPGA based Ambilight clone with direct HDMI input
This is a still-in-progress update to my hdmilight-v2 project.
Differences in this version: Everything is on a standalone board, no longer needs a Papilio FPGA board AVR CPU removed from FPGA design and replaced by a separate ARM Cortex MCU. The main reason for this change was to get more program memory. The FPGA had no more spare block RAMs. It also has the advantage of being a much more capable CPU and having live debugging via JTAG. Power supply switching for the LEDs. This version can power down the LED strips when not in use. Extra pins added to each LED output port, now have +5V, DAT…
Main components on the Hdmilight v3
Hdmilight v3 bill of materials (BOM)
249 components, 68 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F303RETX STM32F303RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | 93CxxB | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | FT2232D | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | ADV7611 | LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm_ThermalVias | U4 |
| 1 | XC6SLX9-TQG144 | TQFP-144_20x20mm_P0.5mm | U5 |
| 1 | TPD12S520 | TSSOP-38_4.4x9.7mm_P0.5mm | U6 |
| 1 | S25FL064L | SOIC-8_5.23x5.23mm_P1.27mm | U7 |
| 4 | 74LVC245 74LV245 | TSSOP-20_4.4x6.5mm_P0.65mm | U8, U9, U10, U11 |
| 1 | TPS65266 | QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias | U12 |
| 1 | IPD90P03P4L04 SUD50P04-08 | TO-252-2 | Q1 |
| 4 | BSS123 | SOT-23 | Q2, Q3, Q4, Q5 |
| 1 | SG-310SCF-32MHZ SG-310SCF-32MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | 6MHz | Crystal_SMD_7050-4Pin_7.0x5.0mm | Y1 |
| 1 | 28.63636MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y2 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
| 1 | HDMI_A | HDMI_SOCKET_FCI_10029449 | J2 |
| 2 | CONN_01X02_MALE Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J3, J12 |
| 4 | CONN_01X08 Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | J4, J5, J6, J10 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Horizontal | J7 |
| 2 | 6P6C | RJ12_Amphenol_54601 | J8, J9 |
Show 48 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J11 |
| 1 | CONN_01X09 Conn_01x09 | PinSocket_1x09_P2.54mm_Vertical | J13 |
| 1 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Horizontal | J14 |
| 2 | 1206L050 | Fuse_1206_3216Metric | F1, F2 |
| 1 | V5.5MLA0603H | R_0603_1608Metric | RV1 |
| 1 | SW_Push | SW_SPST_EVQP0 | SW1 |
| 1 | SW_Push | SW_Tactile_SPST_Angled_PTS645Vx31-2LFS | SW2 |
| 2 | LED Red | LED_0603_1608Metric | D1, D6 |
| 1 | LED Green | LED_0603_1608Metric | D2 |
| 2 | LED Side Red | LED_0603_1608Metric | D3, D8 |
| 2 | 2A | D_SOD-323 | D4, D5 |
| 1 | 5V1 | D_SOD-323 | D7 |
| 1 | LED Side Green | LED_0603_1608Metric | D9 |
| 9 | 22ohm@100MHz | L_0805_2012Metric | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8 +1 |
| 2 | 4.7UH/2.1A 4.7uH/2.1A | L_Bourns-SRN4018 | L1, L2 |
| 1 | 2.2UH/3.5A 2.2uH/3.5A | L_Bourns-SRN4018 | L3 |
| 31 | 0.1UF 0.1uF | C_0402_1005Metric | C1, C5, C6, C7, C8, C9, C59, C60 +23 |
| 16 | 0.1UF 0.1uF | C_0603_1608Metric | C2, C10, C11, C12, C13, C14, C15, C40 +8 |
| 2 | 12PF 12pF | C_0603_1608Metric | C3, C4 |
| 9 | 22UF 22uF | C_0805_2012Metric | C16, C17, C18, C31, C32, C33, C34, C35 +1 |
| 3 | 1NF 1nF | C_0603_1608Metric | C19, C20, C21 |
| 6 | DNI | C_0603_1608Metric | C22, C23, C24, C28, C29, C30 |
| 3 | 0.047UF 0.047uF | C_0603_1608Metric | C25, C26, C27 |
| 1 | 2.2UF 2.2uF | C_0603_1608Metric | C36 |
| 1 | DNI | C_0805_2012Metric | C37 |
| 8 | 33UF 33uF | CP_EIA-3528-21_Kemet-B | C38, C39, C42, C44, C46, C48, C52, C54 |
| 2 | 18PF 18pF | C_0603_1608Metric | C56, C57 |
| 1 | 0.01UF 0.01uF | C_0603_1608Metric | C58 |
| 14 | 4.7UF 4.7uF | C_0805_2012Metric | C72, C79, C82, C83, C98, C100, C102, C104 +6 |
| 21 | 0.47UF 0.47uF | C_0402_1005Metric | C73, C74, C75, C76, C77, C78, C80, C81 +13 |
| 5 | 2K2 | R_0603_1608Metric | R1, R21, R52, R58, R60 |
| 2 | 27R | R_0603_1608Metric | R2, R3 |
| 12 | 10K | R_0603_1608Metric | R4, R16, R22, R41, R44, R45, R46, R47 +4 |
| 1 | 1K5 | R_0603_1608Metric | R5 |
| 1 | 470R | R_0603_1608Metric | R6 |
| 3 | 68R | R_0603_1608Metric | R7, R8, R9 |
| 4 | 1K | R_0603_1608Metric | R10, R11, R12, R71 |
| 1 | 27K | R_0603_1608Metric | R13 |
| 7 | 47K | R_0603_1608Metric | R14, R15, R18, R19, R20, R48, R51 |
| 2 | 100K | R_0603_1608Metric | R17, R59 |
| 24 | 82R | R_0603_1608Metric | R23, R24, R25, R26, R27, R28, R29, R30 +16 |
| 1 | 15K | R_0603_1608Metric | R39 |
| 1 | 33K | R_0603_1608Metric | R40 |
| 1 | 150R | R_0603_1608Metric | R42 |
| 1 | 18K | R_0603_1608Metric | R43 |
| 1 | 20K | R_0603_1608Metric | R49 |
| 3 | 4K7 | R_0603_1608Metric | R53, R54, R55 |
| 1 | 330R | R_0603_1608Metric | R70 |
Hdmilight v3 design files
The KiCad project lives in the esar/hdmilight-v3 repository on GitHub; these links point at the commit this page was built from.
Hdmilight v3: common questions
What microcontroller does the Hdmilight v3 use?
The Hdmilight v3 is built around the STM32F303RETX, from the STM32 family.
How big is the Hdmilight v3 PCB?
The Hdmilight v3 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hdmilight v3?
249 components, from 68 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hdmilight v3 design files?
From the esar/hdmilight-v3 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Hdmilight v3 design in my own project?
Yes, under the terms of its GPL-2.0 license, which esar chose for the repository.
Can I test firmware for the Hdmilight v3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k