7 open source boards using the STM32F303RETx
Real designs built with the STM32F303RETx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Hector
RickKross
275.7 × 105.4 mm178 parts2LCERN-OHL-W-2.016STM32
Hdmilight v3
esar
100 × 100 mm249 parts2LGPL-2.08STM32
Angst
electrodonkey
50.8 × 50.8 mm86 parts2LNo license0STM32
Shoulder
kristblo
88 × 88 mm85 parts4LNo license0STM32
Main
chiplet
100 × 100 mm128 parts4LNo license0STM32
Torso
kristblo
140 × 81 mm79 parts4LNo license0STM32
Hand
kristblo
55.5 × 91 mm74 parts4LNo license0
How designs wire the STM32F303RETx
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F303RETx connects to, and the resistors, capacitors and other passives placed on it.
- The VDDA_13 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VDD_19 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VDD_32 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The VBAT_1 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBAT_1pin 1 | Connected to: 3.3V 80% · a signal 20% |
|
| PC13_2pin 2 | Connected to: Signal 80% · not connected 20% |
|
| PF0_5pin 5 | Connected to: Signal 100% |
|
| NRST_7pin 7 | Connected to: A connector 80% |
|
| VSSA_12pin 12 | Connected to: GND 100% | — |
| VDDA_13pin 13 | Connected to: 3.3V 60% · a signal 40% |
|
| VSS_18pin 18 | Connected to: GND 100% | — |
| VDD_19pin 19 | Connected to: 3.3V 80% · a signal 20% |
|
| PB10_29pin 29 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| VSS_31pin 31 | Connected to: GND 100% | — |
| VDD_32pin 32 | Connected to: 3.3V 80% · a signal 20% |
|
| PC9_40pin 40 | Connected to: Signal 60% · not connected 40% |
|
| PA8_41pin 41 | Connected to: Signal 80% · not connected 20% |
|
| VSS_47pin 47 | Connected to: GND 100% | — |
| VDD_48pin 48 | Connected to: 3.3V 80% · a signal 20% |
|
| BOOT0_60pin 60 | Connected to: A connector 40% |
|
| VSS_63pin 63 | Connected to: GND 100% | — |
| VDD_64pin 64 | Connected to: 3.3V 80% · a signal 20% |
|
46 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hector by RickKross, Hdmilight v3 by esar, Main by chiplet and Angst by electrodonkey.
The STM32F303RETx in open source designs
The gallery holds 7 open source boards using the STM32F303RETx from 5 GitHub repositories; a typical one measures about 100 × 91 mm and carries around 86 components.
57% use four copper layers or more, and 29% carry an open source license.
The most starred is Hector by RickKross.
Parts used alongside the STM32F303RETx
Microcontrollers on boards using the STM32F303RETx
What boards using the STM32F303RETx are built for
STM32F303RETx: common questions
Where can I find a STM32F303RETx reference design?
Each of the 7 boards on this page is a real design using the STM32F303RETx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32F303RETx VDDA_13 pin?
The VDDA_13 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F303RETx.
What decoupling capacitors do designs use on the STM32F303RETx VDD_19 pin?
The VDD_19 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F303RETx.
What decoupling capacitors do designs use on the STM32F303RETx VDD_32 pin?
The VDD_32 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F303RETx.
Which microcontrollers do boards using the STM32F303RETx use?
Most are built on STM32 (7).
How big is a typical board using the STM32F303RETx?
The median is 100 × 91 mm, and 43% are two-layer designs.
What is the most popular open source board using the STM32F303RETx?
By GitHub stars, Hector by RickKross, with 16 stars.
Can I simulate one of these boards using the STM32F303RETx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.