PocketTRS

ESP-WORKS·TTGO-POCKET-TRS·kicad/v2.3c/PocketTRS.kicad_pcb

PocketTRS PCB layout, top view — open source ESP32 board by ESP-WORKS

About the PocketTRS PCB

PocketTRS is an open source ESP32 PCB design by ESP-WORKS, published on GitHub. It is a 2-layer board measuring 87.6 × 83.6 mm, with 48 components from 27 distinct parts.

Its main chip is the 1904-1034-1, from the ESP32 family. Other key parts include the MCP23S17T-E/SS, MCP23S08T-E/SS, LM1117MPX-3.3/NOPB and MCP4361-502E/ST. By type, the board carries 18 resistors, 12 capacitors, 8 connectors, 5 ICs, 3 transistors and 2 switches.

It belongs with the audio, iot & wireless and usb & debug tools designs in this gallery.

From the project

PocketTRS uses a modern microcontroller to emulate a TRS-80 personal computer. It can be connected to any compatible VGA monitor and PS/2 keyboard. PocketTRS has TRS-IO embedded for full FreHD support. PocketTRS offers the following features:

PocketTRS uses a modern microcontroller to emulate a TRS-80 personal computer. It can be connected to any compatible VGA monitor and PS/2 keyboard. PocketTRS has TRS-IO embedded for full FreHD support. PocketTRS offers the following features:

1. Emulates a Model III and Model 4 2. Grafyx support 3. Cassette input (500 baud only) 4. Game sound 5. Emulates the 50-pin expansion interface 6. Integrated TRS-IO

PocketTRS, from the project README
From the project README

Main components on the PocketTRS

1904-1034-1MCP23S17T-E/SSMCP23S08T-E/SSLM1117MPX-3.3/NOPBMCP4361-502E/ST

PocketTRS bill of materials (BOM)

48 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
1904-1034-1
ESP32-WROVER-B
U1
1
MCP23S17T-E/SS
MCP23S17_SP
U2
1
MCP23S08T-E/SS
MCP23S08T-E
U3
1
LM1117MPX-3.3/NOPB
AMS1117-3.3
U4
1
MCP4361-502E/ST
MCP43x1
U5
1
BSS138
Q1
2
MMBT3904-7-F
MMBT3904
Q2, Q3
1
302-S501
TRS-80 Pin Header
J1
1
SJ1-3535NG-BE
AudioJack3
J2
1
5749180-1
Mini-DIN-6
J3
1
ICD15S13E4GV00LF
DB15_Female_HighDensity
J4
1
961136-6404-AR
Programmer
J5
1
10118193-0001LF
USB_B_Micro
J6
1
TRS-80 Edge Connector
J7
1
SD_Card
J8
1
1825910-6
PTRS_RESET
SW1
1
1825910-6
ESP_RESET
SW2
3
CL31F106ZPHNNNE
10U
C1, C2, C11
6
C0805C104Z3VACTU
100N
C3, C6, C7, C8, C9, C10
2
F930J107KAA
100U
C4, C5
Show 7 more
QtyPartRefs
1
CL31B105KOFNNNE
1U
C12
2
RC0805FR-072KL
2K
R4, R5
5
RC0805FR-074K7L
4K7
R6, R7, R12, R13, R16
1
ESR10EZPJ271
270R
R8
1
RNCP0805FTD150R
150R
R9
7
RC0805FR-0710KL
10K
R10, R11, R17, R18, R19, R20, R21
2
CRGCQ0805F12K
12K
R14, R15

PocketTRS design files

The KiCad project lives in the ESP-WORKS/TTGO-POCKET-TRS repository on GitHub; these links point at the commit this page was built from.

PocketTRS: common questions

What microcontroller does the PocketTRS use?

The PocketTRS is built around the 1904-1034-1, from the ESP32 family.

How big is the PocketTRS PCB?

The PocketTRS measures 87.6 × 83.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PocketTRS?

48 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PocketTRS design files?

From the ESP-WORKS/TTGO-POCKET-TRS repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the PocketTRS design in my own project?

The repository has no license, so all rights stay with ESP-WORKS. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PocketTRS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in TTGO-POCKET-TRS

Similar boards