TRSIO

ESP-WORKS·TTGO-POCKET-TRS·components/trs-io/TRS-IO/kicad/m3/v1.2b/TRSIO.kicad_pcb

TRSIO PCB layout, top view — open source ESP32 board by ESP-WORKS

About the TRSIO PCB

TRSIO is an open source ESP32 PCB design by ESP-WORKS, published on GitHub. It is a 2-layer board measuring 93.3 × 80.6 mm, with 33 components from 27 distinct parts.

Its main chip is the ESP32S, from the ESP32 family. Other key parts include the ESP32_AliExpress, MCP23S17T-E/SS, MCP23S08T-E/SS, LM1117MPX-3.3/NOPB and MCP4361-502E/ST. By type, the board carries 11 resistors, 6 ICs, 6 connectors, 4 capacitors, 3 transistors and 2 switches.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:

TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:

1. Access to the RetroStore 2. FreHD emulation 3. Access to files mounted on a SMB share or located on a micro-SD card 4. Access to remote servers via TCP 5. Virtual printer support

The TRS-IO versions for the Model 1 have some additional features that are explained below. The following sections give an overview of TRS-IO as well as setup instructions. This Github repository contains the complete source code as well as the KiCad schematics…

TRSIO, from the project README
From the project README

Main components on the TRSIO

TRSIO bill of materials (BOM)

33 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32S
U1A1
1
ESP32_AliExpress
U1B1
1
MCP23S17T-E/SS
74LVC245
U2
1
MCP23S08T-E/SS
GAL16V8
U3
1
LM1117MPX-3.3/NOPB
74LVC245
U4
1
MCP4361-502E/ST
MCP23S08
U5
1
BSS138
2N7000
Q1
2
MMBT3904-7-F
2N7000
Q2, Q3
1
302-S501
TRS80
J1
1
SJ1-3535NG-BE
+5V
J2
1
5749180-1
BUTTON
J3
1
961136-6404-AR
FreHD Disable
J5
1
10118193-0001LF
TRS80
J6
1
SD_Card
J7
1
1825910-6
SW_Push
SW1
1
1825910-6
Right Angle
SW2
1
LED_RCBG
D1
2
CL31F106ZPHNNNE
0.1
C1, C2
1
C0805C104Z3VACTU
0.1
C3
1
F930J107KAA
0.1
C4
Show 7 more
QtyPartRefs
3
100
R1, R2, R3
1
RC0805FR-072KL
4K7
R4
1
RC0805FR-072KL
10K
R5
2
RC0805FR-074K7L
10K
R6, R7
1
ESR10EZPJ271
10K
R8
1
RNCP0805FTD150R
10K
R9
2
RC0805FR-0710KL
10K
R10, R11

TRSIO design files

The KiCad project lives in the ESP-WORKS/TTGO-POCKET-TRS repository on GitHub; these links point at the commit this page was built from.

TRSIO: common questions

What microcontroller does the TRSIO use?

The TRSIO is built around the ESP32S, from the ESP32 family.

How big is the TRSIO PCB?

The TRSIO measures 93.3 × 80.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TRSIO?

33 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TRSIO design files?

From the ESP-WORKS/TTGO-POCKET-TRS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TRSIO design in my own project?

The repository has no license, so all rights stay with ESP-WORKS. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TRSIO without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in TTGO-POCKET-TRS

Similar boards