ESP32-Industrial-Sensor-Controller
Eswar-426·ESP32-Industrial-Sensor-Controller·hardware/ESP32_Industrial_Sensor_Controller.kicad_pcb
About the ESP32-Industrial-Sensor-Controller PCB
ESP32-Industrial-Sensor-Controller is an open source ESP32 PCB design by Eswar-426, published on GitHub. It is a 2-layer board measuring 50.5 × 38.5 mm, with 15 components from 12 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AP2112K-3.3 and SHT31-DIS. By type, the board carries 5 capacitors, 4 resistors, 3 ICs, 2 switches and 1 connector.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
A custom, compact PCB designed in KiCad 10 for an ESP32-based industrial temperature and humidity monitoring system.
A custom, compact PCB designed in KiCad 10 for an ESP32-based industrial temperature and humidity monitoring system.
The board integrates an ESP32-WROOM-32 Wi-Fi & Bluetooth microcontroller module, a high-precision Sensirion SHT31-DIS digital environmental sensor, and an ultra-low-dropout AP2112K-3.3 voltage regulator. It features dedicated I²C bus pull-up resistors, hardware Reset and Boot mode tactile switches, comprehensive decoupling networks, and an FTDI-compatible 6-pin UART interface for flashing and serial telemetry.

Main components on the ESP32-Industrial-Sensor-Controller
ESP32-Industrial-Sensor-Controller bill of materials (BOM)
15 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U2 |
| 1 | SHT31-DIS | Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U3 |
| 1 | CONN_01X06 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Reset button | SW_SPST_CK_KMS2xxGP | SW1 |
| 1 | boot button | SW_SPST_CK_KMS2xxGP | SW2 |
| 2 | 1µF | C_0603_1608Metric | C1, C2 |
| 1 | 10µF | C_0603_1608Metric | C3 |
| 1 | 100 nF | C_0603_1608Metric | C4 |
| 1 | 100NF 100nF | C_0603_1608Metric | C5 |
| 2 | 10kΩ | R_0603_1608Metric | R2, R3 |
| 2 | 4.7 kΩ | R_0603_1608Metric | R4, R5 |
ESP32-Industrial-Sensor-Controller design files
The KiCad project lives in the Eswar-426/ESP32-Industrial-Sensor-Controller repository on GitHub; these links point at the commit this page was built from.
ESP32-Industrial-Sensor-Controller: common questions
What microcontroller does the ESP32-Industrial-Sensor-Controller use?
The ESP32-Industrial-Sensor-Controller is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the ESP32-Industrial-Sensor-Controller PCB?
The ESP32-Industrial-Sensor-Controller measures 50.5 × 38.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-Industrial-Sensor-Controller?
15 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-Industrial-Sensor-Controller design files?
From the Eswar-426/ESP32-Industrial-Sensor-Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-Industrial-Sensor-Controller design in my own project?
The repository has no license, so all rights stay with Eswar-426. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-Industrial-Sensor-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k