ECE 319K Baseline Project
Ethan-Hale·EmbeddedLab_FinalProj·hw/ECE319KStarter.kicad_pcb
About the ECE 319K Baseline Project PCB
ECE 319K Baseline Project is an open source PCB design by Ethan-Hale, published on GitHub. It is a 2-layer board measuring 114.3 × 88.9 mm, with 40 components from 27 distinct parts.
Other key parts include the Adafruit ST7735R, LP-MSPM0G3507, MCP34119P and HiLetGo_ST7735R. By type, the board carries 17 resistors, 6 connectors, 4 ICs, 4 switches, 3 diodes and 3 capacitors.
It belongs with the iot & wireless designs in this gallery.
From the project
Code and everything for an electronic piano with 24 keys, pressure sensing, swappable sounds, bluetooth connectivity, and cheap hardware
Main components on the ECE 319K Baseline Project
ECE 319K Baseline Project bill of materials (BOM)
40 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Adafruit ST7735R Adafruit | adafruit_st7735r2 | U1 |
| 1 | LP-MSPM0G3507 Texas Instruments | ti_LP_MSPM0G3507 | U2 |
| 1 | MCP34119P Motorola | DIP-8_W7.62mm_LongPads | U3 |
| 1 | HiLetGo_ST7735R HiLetGo | hiletgo_st7735r | U4 |
| 1 | AudioJack | Jack_3.5mm_CUI_SJ1-3523N_Horizontal | J1 |
| 1 | Speaker | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | UART1 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Pot | Testpoint_1x02_P2.54mm | J4 |
| 1 | GND | Testpoint_1x02_P2.54mm | J6 |
| 1 | DACOUT | Testpoint_1x02_P2.54mm | J7 |
| 1 | TExaS | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | PTA2043 | PTA2043pot | RV1 |
| 1 | UP | SW_PUSH_6mm | SW1 |
| 1 | LEFT | SW_PUSH_6mm | SW2 |
| 1 | DOWN | SW_PUSH_6mm | SW3 |
| 1 | RGHT | SW_PUSH_6mm | SW4 |
| 1 | 3.3V | Testpoint_1x02_P2.54mm | TP1 |
| 3 | LED | LED_D5.0mm | D1, D2, D3 |
| 1 | 1UF 1uF | CP_Radial_Tantal200mil | C1 |
| 1 | 1UF 4.7uF | CP_Radial_Tantal200mil | C2 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2.2UF 0.1uF | C_Axial_200mil | C3 |
| 1 | 10K 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 2 | 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R3 |
| 5 | 1.5k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R5, R6, R7, R8 |
| 3 | 12k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R10, R11 |
| 5 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12, R13, R14, R15, R17 |
| 1 | 20k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R16 |
ECE 319K Baseline Project design files
The KiCad project lives in the Ethan-Hale/EmbeddedLab_FinalProj repository on GitHub; these links point at the commit this page was built from.
ECE 319K Baseline Project: common questions
How big is the ECE 319K Baseline Project PCB?
The ECE 319K Baseline Project measures 114.3 × 88.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ECE 319K Baseline Project?
40 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ECE 319K Baseline Project design files?
From the Ethan-Hale/EmbeddedLab_FinalProj repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ECE 319K Baseline Project design in my own project?
The repository has no license, so all rights stay with Ethan-Hale. Use it as a reference, and ask the author before reusing the design.
More boards in EmbeddedLab_FinalProj
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547