10 open source boards using the HiLetGo_ST7735R

Real designs built with the HiLetGo_ST7735R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the HiLetGo_ST7735R

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the HiLetGo_ST7735R connects to, and the resistors, capacitors and other passives placed on it.

  • The PIN3 pin is left unconnected on 10 of 10 designs.
  • The PIN4 pin is left unconnected on 10 of 10 designs.
  • The PIN5 pin is left unconnected on 10 of 10 designs.
  • The LED+ pin is tied to 3.3V on 10 of 10 designs.
GNDpin 1Connected to: GND 100%
VCCpin 2Connected to: 3.3V 100%
PIN3pin 3Connected to: Not connected 100%
PIN4pin 4Connected to: Not connected 100%
PIN5pin 5Connected to: Not connected 100%
LED+pin 15Connected to: 3.3V 100%
LED-pin 16Connected to: GND 100%

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CrickHit by devanshjoshi08, ECE 319K Baseline Project by Andres-Wearden, ECE 319K Baseline Project by DylanMeeks and ECE 319K Baseline Project by Ethan-Hale.

The HiLetGo_ST7735R in open source designs

The gallery holds 10 open source boards using the HiLetGo_ST7735R from 10 GitHub repositories; a typical one measures about 114.3 × 88.9 mm and carries around 40 components.

100% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.

The most starred is CrickHit by devanshjoshi08.

What boards using the HiLetGo_ST7735R are built for

HiLetGo_ST7735R: common questions

Where can I find a HiLetGo_ST7735R reference design?

Each of the 10 boards on this page is a real design using the HiLetGo_ST7735R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the HiLetGo_ST7735R PIN3 pin connected?

The PIN3 pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the HiLetGo_ST7735R.

How is the HiLetGo_ST7735R PIN4 pin connected?

The PIN4 pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the HiLetGo_ST7735R.

How is the HiLetGo_ST7735R PIN5 pin connected?

The PIN5 pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the HiLetGo_ST7735R.

What parts are used alongside the HiLetGo_ST7735R?

The Adafruit ST7735R, LP-MSPM0G3507, MCP34119P, TSOP31438 and ULN2003B appear in the most repositories here.

How big is a typical board using the HiLetGo_ST7735R?

The median is 114.3 × 88.9 mm, and 100% are two-layer designs.

What is the most popular open source board using the HiLetGo_ST7735R?

By GitHub stars, CrickHit by devanshjoshi08, with 1 stars.

Can I simulate one of these boards using the HiLetGo_ST7735R before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part