ECE 445L Baseline Project
Ethan-Hale·EmbeddedLab_FinalProj·hw/baseline_project.kicad_pcb
About the ECE 445L Baseline Project PCB
ECE 445L Baseline Project is an open source ESP32 PCB design by Ethan-Hale, published on GitHub. It is a 2-layer board measuring 152 × 110.6 mm, with 40 components from 25 distinct parts.
Its main chip is the ESP32-DEVKITC, from the ESP32 family. Other key parts include the TM4C123GH6PMIR, LM2937ET-3.3/NOPB and EK-TM4C123GXL. By type, the board carries 15 capacitors, 9 connectors, 7 test points, 5 ICs, 2 resistors and 1 crystal.
It belongs with the iot & wireless designs in this gallery.
From the project
Code and everything for an electronic piano with 24 keys, pressure sensing, swappable sounds, bluetooth connectivity, and cheap hardware
Main components on the ECE 445L Baseline Project
ECE 445L Baseline Project bill of materials (BOM)
40 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TM4C123GH6PMIR | QFP50P1200X1200X160-64N | IC1 |
| 1 | LM2937ET-3.3/NOPB | T03B | U29 |
| 2 | EK-TM4C123GXL Texas Instruments | ti_EKTM4C123GXL | U30_BACKUP, U101_LP_STANDALONE |
| 1 | ESP32-DEVKITC | MODULE_ESP32-DEVKITC | U31_ESP32 |
| 1 | ABM3-16.000MHZ-B2-T | ABM3 | Y1 |
| 1 | Barrel_Jack | BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J1_Barrel |
| 1 | Header_5 | PinHeader_1x05_P2.54mm_Vertical | J2_JTAG |
| 1 | Conn_01x06_Socket_DAC | Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | J3_DAC |
| 1 | LCD SD HEADERS | Molex_KK-254_AE-6410-11A_1x11_P2.54mm_Vertical | J8_SDCARD |
| 1 | ADC2 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J9_ADC2 |
| 1 | ADC1 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J10_ADC1 |
| 1 | ADC3 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J11_ADC3 |
| 1 | 3.3V Pads | AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J12 |
| 1 | 5V Pads | AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J13 |
| 1 | RESET | SW_PUSH_6mm | SW1 |
| 7 | TestPoint | Pin_D1.0mm_L10.0mm | TP13, TP14, TP19, TP20, TP21, TP22, TP23 |
| 2 | 1UF 1uF | CP_Radial_Tantal200mil | C1, C2 |
| 1 | 2.2UF 2.2uF | CP_Radial_Tantal200mil | C3 |
| 5 | 0.1UF 0.1uF | C_Axial_200mil | C4, C5, C10, C12, C14 |
| 2 | 10PF 10pF | C_Axial_200mil | C6, C7 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1UF 1uF | C_Axial_200mil | C8, C11 |
| 2 | 0.01UF 0.01uF | C_Axial_200mil | C9, C13 |
| 1 | 10UF 10uF | C_Axial_200mil | C15 |
| 1 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 1M | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
ECE 445L Baseline Project design files
The KiCad project lives in the Ethan-Hale/EmbeddedLab_FinalProj repository on GitHub; these links point at the commit this page was built from.
ECE 445L Baseline Project: common questions
What microcontroller does the ECE 445L Baseline Project use?
The ECE 445L Baseline Project is built around the ESP32-DEVKITC, from the ESP32 family.
How big is the ECE 445L Baseline Project PCB?
The ECE 445L Baseline Project measures 152 × 110.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ECE 445L Baseline Project?
40 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ECE 445L Baseline Project design files?
From the Ethan-Hale/EmbeddedLab_FinalProj repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ECE 445L Baseline Project design in my own project?
The repository has no license, so all rights stay with Ethan-Hale. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ECE 445L Baseline Project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in EmbeddedLab_FinalProj
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k