Light Commander
ethandrzb·Eurorack_WS2812_LED_Controller·eda/Light_Commander/Light_Commander.kicad_pcb
About the Light Commander PCB
Light Commander is an open source STM32 PCB design by ethandrzb, published on GitHub. It is a 6-layer board measuring 70.2 × 108 mm, with 163 components from 61 distinct parts.
Its main chip is the STM32F446RETx, from the STM32 family. Other key parts include the TL084, AD8544, R-785.0-0.5, AP2112K-3.3 and USBLC6-2SC6. By type, the board carries 58 resistors, 38 capacitors, 20 connectors, 11 ICs, 10 diodes and 9 switches.
It belongs with the audio and displays & leds designs in this gallery.
Main components on the Light Commander
Light Commander bill of materials (BOM)
163 components, 61 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TL084 | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | AD8544 | SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | R-785.0-0.5 | Converter_DCDC_RECOM_R-78E-0.5_THT | U4 |
| 1 | AP2112K-3.3 | SOT-23-5 | U5 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U6 |
| 1 | 2.5V Ref | SOT-23-6 | U7 |
| 2 | NXU0101GW | SOT-363_SC-70-6 | U8, U11 |
| 1 | SH1106_OLED | SH1106_1.3in_OLED | U9 |
| 1 | 6N137 | SOP-8_6.605x9.655mm_P2.54mm | U10 |
| 4 | MMBT3904 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | Q_PMOS_GSD | SOT-23-3 | Q5 |
| 1 | Q_NMOS_GSD | SOT-23-3 | Q6 |
| 1 | Q_PMOS_GDS | TO-252-2 | Q7 |
| 1 | 8 MHz | ECS-80-18-33-JGN-TR | Y1 |
| 1 | GATE0 | PJ301M-12 | J1 |
| 1 | GATE1 | PJ301M-12 | J2 |
| 1 | GATE2 | PJ301M-12 | J3 |
| 1 | GATE3 | PJ301M-12 | J4 |
| 1 | INA | PJ301M-12 | J5 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INB | PJ301M-12 | J6 |
| 1 | INC | PJ301M-12 | J7 |
| 1 | IND | PJ301M-12 | J8 |
| 1 | BUFFA | PJ301M-12 | J9 |
| 1 | BUFFB | PJ301M-12 | J10 |
| 1 | BUFFC | PJ301M-12 | J11 |
| 1 | BUFFD | PJ301M-12 | J12 |
| 1 | Eurorack_Power | IDC-Header_2x05_P2.54mm_Vertical | J13 |
| 1 | USB_C_Receptacle_USB2.0_16P | UJ20-C-H-G-SMT-1-P16-TR | J14 |
| 1 | Conn_01x05 | CUI_TBLH10V-350-05BK | J15 |
| 1 | MIDI_IN | PJ301M-12_STEREO | J16 |
| 1 | MIDI_THRU | PJ301M-12_STEREO | J17 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J18 |
| 1 | Conn_02x07_Odd_Even | SAMTEC_FTSH-107-01-L-DV-K-A | J19 |
| 1 | Conn_02x03_Odd_Even | IDC-Header_2x03_P2.54mm_Vertical | J20 |
| 2 | 500mA | Fuse_1206_3216Metric | F1, F2 |
| 2 | Polyfuse | Fuse_0805_2012Metric | F3, F4 |
| 1 | 5x20mm 10A Holder | 05200101Z | F5 |
| 1 | RotaryEncoder_Switch | PEC11R-4220K-S0024 | SW1 |
| 1 | SW_Push | TS09-63-25-R-160-SMT-TR | SW2 |
| 2 | SW_DPDT_x2 | CAS-220TA | SW3, SW4 |
| 5 | ~ | SW_Tact_Low_Profile_LED_ExtraHoles | SW5, SW6, SW7, SW8, SW9 |
| 4 | GSBAT54W | D_SOD-123 | D1, D2, D3, D4 |
| 1 | D_Schottky | D_SOD-123 | D5 |
| 4 | D_TVS | D_SOD-123F | D6, D8, D9, D10 |
| 1 | D | D_SOD-123 | D7 |
| 4 | 10uH | L_1210_3225Metric | L1, L2, L3, L4 |
| 4 | 47nF | C_0805_2012Metric | C1, C2, C3, C4 |
| 23 | 100nF | C_0805_2012Metric | C5, C6, C7, C8, C9, C14, C15, C21 +15 |
| 5 | 10uF | C_Elec_6.3x7.7 | C10, C11, C12, C13, C30 |
| 2 | 18pF | C_0402_1005Metric | C16, C17 |
| 4 | 4.7 uF | C_0805_2012Metric | C18, C19, C20, C27 |
| 8 | 100k | R_0805_2012Metric | R1, R7, R13, R19, R25, R27, R29, R30 |
| 4 | 1k | R_0805_2012Metric | R2, R8, R14, R20 |
| 4 | 200k | R_0805_2012Metric | R3, R9, R15, R21 |
| 4 | 47k | R_0805_2012Metric | R4, R10, R16, R22 |
| 4 | 62k | R_0805_2012Metric | R5, R11, R17, R23 |
| 4 | 100 | R_0805_2012Metric | R6, R12, R18, R24 |
| 20 | 10k | R_0805_2012Metric | R26, R28, R31, R32, R33, R34, R35, R38 +12 |
| 2 | 5.1k | R_0805_2012Metric | R36, R37 |
| 8 | 220 | R_0805_2012Metric | R42, R45, R46, R47, R49, R51, R53, R55 |
Light Commander design files
The KiCad project lives in the ethandrzb/Eurorack_WS2812_LED_Controller repository on GitHub; these links point at the commit this page was built from.
Light Commander: common questions
What microcontroller does the Light Commander use?
The Light Commander is built around the STM32F446RETx, from the STM32 family.
How big is the Light Commander PCB?
The Light Commander measures 70.2 × 108 mm, has 6 copper layers and is 1.5744 mm thick.
How many components are on the Light Commander?
163 components, from 61 distinct parts. The full bill of materials is listed on this page.
Where can I download the Light Commander design files?
From the ethandrzb/Eurorack_WS2812_LED_Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Light Commander design in my own project?
The repository has no license, so all rights stay with ethandrzb. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Light Commander without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k