Eddie bldc
About the Eddie bldc PCB
Eddie bldc is an open source PCB design by ethanjamesauto, published on GitHub. It is a 2-layer board measuring 48.3 × 48.3 mm, with 63 components from 10 distinct parts.
Other key parts include the IRS2005S and INA180A2. By type, the board carries 16 connectors, 16 resistors, 15 capacitors, 6 ICs, 6 transistors and 4 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
CPU card Protoboard card This card contains an onboard clock generator, address and data registers/buffers, and a protoboard area for testing designs. Bus interface modeling
Main components on the Eddie bldc
Eddie bldc bill of materials (BOM)
63 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | IRS2005S | SOIC-8_3.9x4.9mm_P1.27mm | U1, U3, U5 |
| 3 | INA180A2 | SOT-23-5 | U2, U4, U6 |
| 6 | NMOS | TO-252-3_TabPin2 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J7 |
| 12 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J4, J5, J6, J10, J11, J12, J13, J14 +4 |
| 3 | D | D_SOD-123 | D1, D2, D3 |
| 1 | LED | R_0603_1608Metric | D4 |
| 15 | C | R_0603_1608Metric | C1, C1_BOOT1, C1_BOOT2, C1_BOOT3, C2, C3, C4, C5 +7 |
| 13 | R | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +5 |
| 3 | R | R_1206_3216Metric | R3_SHUNT1, R3_SHUNT2, R3_SHUNT3 |
Eddie bldc design files
The KiCad project lives in the ethanjamesauto/modular_8bit_computer repository on GitHub; these links point at the commit this page was built from.
Eddie bldc: common questions
How big is the Eddie bldc PCB?
The Eddie bldc measures 48.3 × 48.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eddie bldc?
63 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Eddie bldc design files?
From the ethanjamesauto/modular_8bit_computer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Eddie bldc design in my own project?
The repository has no license, so all rights stay with ethanjamesauto. Use it as a reference, and ask the author before reusing the design.
More boards in modular_8bit_computer
Huhhhh I didnt save
229.9 × 93.3 mm365 parts2LNo license1
Processor attempt 3
229.9 × 93.3 mm365 parts2LNo license1
Processor attempt 1
229.9 × 93.3 mm365 parts2LNo license1
Processor attempt 4
229.9 × 83.8 mm291 parts2LNo license1
Processor attempt 2
229.9 × 93.3 mm272 parts2LNo license1
Motherboard
222.3 × 127 mm208 parts2LNo license1
Fish
0.7 × 0.3 mm162 parts2LNo license1
8 bit logic analyzer
104.1 × 25.4 mm60 parts2LNo license1
PCB PCB OpenSuperHetv6
64.1 × 27.6 mm57 parts2LNo license1
93c46a type
132.1 × 83.8 mm39 parts2LNo license1
74ls245 high current attempt 2
30.5 × 21.6 mm37 parts2LNo license1
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979