HardLabs

Huhhhh I didnt save

ethanjamesauto·modular_8bit_computer·processor_attempt_3/huhhhh I didnt save.kicad_pcb

Huhhhh I didnt save PCB layout, top view — open source board by ethanjamesauto

About the Huhhhh I didnt save PCB

Huhhhh I didnt save is an open source PCB design by ethanjamesauto, published on GitHub. It is a 2-layer board measuring 229.9 × 93.3 mm, with 365 components from 51 distinct parts.

Other key parts include the NE555D, 74LS161, 74LS574, 28C256 and 74LS245. By type, the board carries 142 resistors, 82 diodes, 65 connectors, 49 ICs, 14 capacitors and 12 transistors.

From the project

CPU card Protoboard card This card contains an onboard clock generator, address and data registers/buffers, and a protoboard area for testing designs. Bus interface modeling

Huhhhh I didnt save, from the project README
From the project README

Main components on the Huhhhh I didnt save

NE555D74LS16174LS57428C25674LS24574LS273HM62256BLP74LS28374LS0474HC68874LS0074LS3074LS13874LVC1G08

Huhhhh I didnt save bill of materials (BOM)

365 components, 51 distinct parts.

QtyPartRefs
1
NE555D
U1
4
74LS161
U2, U3, U4, U5
9
74LS574
U6, U7, U25, U26, U27, U44, U45, U47 +1
2
28C256
U18, U19
8
74LS245
U21, U23, U29, U30, U31, U48, U49, U50
3
74LS273
U24, U40, U41
1
HM62256BLP
U28
2
74LS283
U32, U39
6
~
U33, U34, U35, U36, U37, U38
2
74LS04
U42, U56
1
74HC688
U43
1
HM62256BLP
U46
1
74LS161
U51
2
74LS00
U52, U53
1
74LS30
U55
4
74LS138
U57, U58, U59, U60
1
74LVC1G08
U61
12
FDG1024NZ
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +4
6
Conn_01x03_Pin
J1, J31, J32, J33, J34, J69
1
Conn_01x40_Pin
J3
Show 31 more
QtyPartRefs
10
Conn_01x08_Pin
J4, J20, J22, J23, J24, J25, J26, J27 +2
9
Conn_01x10_Pin
J7, J8, J9, J10, J11, J12, J13, J18 +1
4
Conn_01x06_Pin
J14, J15, J16, J17
4
Conn_01x01_Pin
J30, J35, J40, J42
30
J
J36, J41, J43, J44, J45, J46, J47, J48 +22
1
Clock_Aux_Latch_0
J39
1
1
5V_rsns1
37
A0
D1, D17, D25, D33, D41, D49, D50, D51 +29
5
A1
D2, D18, D26, D34, D42
5
A2
D3, D19, D27, D35, D43
5
A3
D4, D20, D28, D36, D44
6
A4
D5, D21, D29, D37, D45, D82
5
A5
D6, D22, D30, D38, D46
5
A6
D7, D23, D31, D39, D47
5
A7
D8, D24, D32, D40, D48
1
A8
D9
1
A9
D10
1
A10
D11
1
A11
D12
1
A12
D13
1
A13
D14
1
A14
D15
1
A15
D16
1
5V_RAW
D81
2
C
C1, C2
12
100nF
C3, C4, C5, C6, C7, C9, C10, C11 +4
4
R
R1, R2, R141, R142
28
10k
R3, R4, R6, R7, R11, R12, R13, R14 +20
24
1k
R5, R8, R9, R10, R15, R16, R17, R18 +16
4
0
R103, R104, R105, R106
82
470
r51, r52, r53, r54, r55, r56, r57, r58 +74

Huhhhh I didnt save design files

The KiCad project lives in the ethanjamesauto/modular_8bit_computer repository on GitHub; these links point at the commit this page was built from.

Huhhhh I didnt save: common questions

How big is the Huhhhh I didnt save PCB?

The Huhhhh I didnt save measures 229.9 × 93.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Huhhhh I didnt save?

365 components, from 51 distinct parts. The full bill of materials is listed on this page.

Where can I download the Huhhhh I didnt save design files?

From the ethanjamesauto/modular_8bit_computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Huhhhh I didnt save design in my own project?

The repository has no license, so all rights stay with ethanjamesauto. Use it as a reference, and ask the author before reusing the design.

More boards in modular_8bit_computer