Ultramote

etrommer·ultramote·pcb/ultramote.kicad_pcb

Ultramote PCB layout, top view — open source board by etrommer

About the Ultramote PCB

Ultramote is an open source PCB design by etrommer, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40 × 42.5 mm, with 54 components from 29 distinct parts.

Other key parts include the LoRa-E5, TPS2112APW, MCP73831T-2ACI/OT, TLV70233DBVT and CH340N. By type, the board carries 16 resistors, 14 capacitors, 7 ICs, 7 connectors, 5 diodes and 2 transistors.

It belongs with the rf & radio designs in this gallery.

From the project

Development repository for the Ultramote long distance camera release system

The firmware debug configuration uses a Black Magic Probe directly as a GDB remote target. It does not require an OpenOCD or pyOCD server. Install arm-none-eabi-gdb, build the firmware, and start a direct session with:

The two Cortex-Debug profiles provide either a flash-and-launch session or an attach-only session.

The repository includes a VS Code Dev Container with the pinned STM32CubeMX 6.16.0 Linux package, the STM32CubeWL 1.3.0 firmware package, the GNU Arm Embedded toolchain, GDB, OpenOCD, and ST-Link tools. Open the repository in VS Code and run Dev Containers: Reopen in Container.…

Main components on the Ultramote

Ultramote bill of materials (BOM)

54 components, 29 distinct parts.

QtyPartRefs
1
LoRa-E5
U1
1
TPS2112APW
U2
1
MCP73831T-2ACI/OT
MCP73831-5-OT
U3
1
TLV70233DBVT
U4
1
CH340N
U5
2
EL357N(B)(TA)-G
EL357
U6, U7
1
2N7002
Q1
1
BSS84A-TP
BSS84
Q2
1
SMA-KE-P903
SMA-KWE902
J1
1
S2B-PH-SM4-TB(LF)(SN)
SM02B-SRSS-TB
J2
1
918-418K2023S40001
USB-C-XKB_U262-16XN
J3
1
QWIIC
J4
1
WST-REDFIT-4P
J5
2
PJ-242D-SMT
J6, J7
1
Battery
B1
1
SSSS211603
SW1
1
LTST-C195KGJRKT
D1
1
TPSP0503BAHTG
SP0503BAHTG
D2
2
BAT54S
D3, D5
1
19-237/R6GHBHC-A07/2T
D4
Show 9 more
QtyPartRefs
1
MMZ1608B601CTAH0
FB1
4
CL10A475MA8NQNC
4.7u
C1, C8, C9, C10
8
CL10B104KB8SNNC
0.1u
C2, C3, C4, C5, C11, C12, C13, C14
2
CL10B105KA8NNNC
1u
C6, C7
2
0603WAF1002T5E
10k
R1, R3
3
0603WAF5101T5E
5.1k
R2, R7, R8
3
0603WAF1001T5E
1k
R4, R9, R12
1
0603WAF3301T5E
3.3k
R5
7
0603WAF2200T5E
220
R6, R10, R11, R13, R14, R15, R16

Ultramote design files

The KiCad project lives in the etrommer/ultramote repository on GitHub; these links point at the commit this page was built from.

Ultramote: common questions

How big is the Ultramote PCB?

The Ultramote measures 40 × 42.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ultramote?

54 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ultramote design files?

From the etrommer/ultramote repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Ultramote design in my own project?

Yes, under the terms of its GPL-3.0 license, which etrommer chose for the repository.

Similar boards