HardLabs

RPI Interface

evolutek·cartolutek-hardware·RPI Interface/RPI_Interface.kicad_pcb

RPI Interface PCB layout, top view — open source Raspberry Pi board by evolutek

About the RPI Interface PCB

RPI Interface is an open source Raspberry Pi PCB design by evolutek, published on GitHub. It is a 2-layer board measuring 56 × 65 mm, with 26 components from 20 distinct parts.

Its main chip is the RaspberryPI, from the Raspberry Pi family. Other key parts include the NCP718xSN330, MCP2515-xST and MCP2551-I-SN. By type, the board carries 9 capacitors, 6 resistors, 4 ICs, 2 connectors, 2 jumpers and 1 module.

Main components on the RPI Interface

NCP718xSN330MCP2515-xSTMCP2551-I-SNRaspberryPI

RPI Interface bill of materials (BOM)

26 components, 20 distinct parts.

QtyPartRefs
1
NCP718xSN330
U2
1
MCP2515-xST
U4
1
MCP2551-I-SN
U5
1
RaspberryPI
U7
1
Fan_20x20mm
M1
1
16 MHz
Y1
1
Fan
J1
1
Computer Interface
J3
1
Jumper_2_Open
JP1
1
Jumper_2_Small_Open
JP2
1
RED
D1
1
100uF
C1
1
10uF
C2
2
1uF
C3, C9
3
100nF
C4, C12, C17
2
22pF
C10, C11
1
1k
R1
3
4.7k
R4, R8, R9
1
0
R5
1
120
R7

RPI Interface design files

The KiCad project lives in the evolutek/cartolutek-hardware repository on GitHub; these links point at the commit this page was built from.

RPI Interface: common questions

What microcontroller does the RPI Interface use?

The RPI Interface is built around the RaspberryPI, from the Raspberry Pi family.

How big is the RPI Interface PCB?

The RPI Interface measures 56 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RPI Interface?

26 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the RPI Interface design files?

From the evolutek/cartolutek-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RPI Interface design in my own project?

The repository has no license, so all rights stay with evolutek. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RPI Interface without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in cartolutek-hardware

Similar boards