32 open source boards using the MCP2515-XST

Real designs built with the MCP2515-XST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

32 boardsClear filters|Most starred

How designs wire the MCP2515-XST

Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the MCP2515-XST connects to, and the resistors, capacitors and other passives placed on it.

  • The OSC2 pin has a capacitor to GND on 17 of 21 designs, most often 22 pF (then 20 pF).
  • The OSC1 pin has a crystal on 17 of 20 designs, most often 16 MHz (then 8 MHz).
  • The OSC1 pin has a capacitor to GND on 17 of 20 designs, most often 22 pF (then 20 pF).
  • The CLKOUT/SOF pin is left unconnected on 20 of 21 designs.
CLKOUT/SOFpin 3Connected to: Not connected 95%
TX0RTSpin 4Connected to: Not connected 90%
TX1RTSpin 5Connected to: Not connected 95%
NCpin 6, 15Connected to: Not connected 98%
TX2RTSpin 7Connected to: Not connected 90%
OSC2pin 8Connected to: Signal 86%
  • Capacitor to GND on 81% · 22 pF (7), 20 pF (2), 12 pF (2)
  • Crystal on 76% · 16 MHz (6), 8 MHz (4), 12 MHz (1)
OSC1pin 9Connected to: Signal 100%
  • Crystal on 85% · 16 MHz (6), 8 MHz (4), 12 MHz (1)
  • Capacitor to GND on 85% · 22 pF (7), 20 pF (2), 12 pF (2)
VSSpin 10Connected to: GND 100%
RX1BFpin 11Connected to: Not connected 100%
RX0BFpin 12Connected to: Not connected 90%
RESETpin 19Connected to: Signal 90%
  • Pull-up to 3.3V on 60% · 10 kΩ (10), 100 kΩ (1), 4.7 kΩ (1)
VDDpin 20Connected to: 3.3V 85% · a signal 15%
  • Decoupling capacitor on 70% · 100 nF (17), 1 µF (3), 10 µF (2)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Womo by muccc, Usb2most by smartgauges, Mbed ce ci shield v2 by mbed-ce and Controllino can by HarveyBates.

The MCP2515-XST in open source designs

The gallery holds 32 open source boards using the MCP2515-XST from 22 GitHub repositories; a typical one measures about 90 × 66.8 mm and carries around 76 components.

78% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is Womo by muccc.

Microcontrollers on boards using the MCP2515-XST

MCP2515-XST: common questions

Where can I find a MCP2515-XST reference design?

Each of the 32 boards on this page is a real design using the MCP2515-XST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MCP2515-XST OSC2 pin connected?

The OSC2 pin has a capacitor to GND on 17 of 21 designs, most often 22 pF (then 20 pF). Counted from the KiCad layouts of 21 open source designs using the MCP2515-XST.

How is the MCP2515-XST OSC1 pin connected?

The OSC1 pin has a crystal on 17 of 20 designs, most often 16 MHz (then 8 MHz). Counted from the KiCad layouts of 21 open source designs using the MCP2515-XST.

How is the MCP2515-XST CLKOUT/SOF pin connected?

The CLKOUT/SOF pin is left unconnected on 20 of 21 designs. Counted from the KiCad layouts of 21 open source designs using the MCP2515-XST.

What parts are used alongside the MCP2515-XST?

The MCP2551-I-SN, AMS1117-3.3, MCP2562-E-SN, 40106 and ATMEGA328-A appear in the most repositories here.

Which microcontrollers do boards using the MCP2515-XST use?

Most are built on AVR/Arduino (13), Raspberry Pi (5), RP2040/RP2350 (4) and ESP32 (2).

How big is a typical board using the MCP2515-XST?

The median is 90 × 66.8 mm, and 78% are two-layer designs.

What is the most popular open source board using the MCP2515-XST?

By GitHub stars, Womo by muccc, with 84 stars.

Can I simulate one of these boards using the MCP2515-XST before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part