Half life VP

ez-pratham·half-life_VP

Half life VP PCB layout, top view — open source ESP32 board by ez-pratham

About the Half life VP PCB

Half life VP is an open source ESP32 PCB design by ez-pratham, published on GitHub. It is a 2-layer board measuring 127.5 × 123 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the iot & wireless, keyboards and sensors designs in this gallery.

From the project

half life

A custom, open-source 2-layer printed circuit board designed for Hack Club's Half-Life hardware program (Week 1: PCB Theme). Built around the compact, high-performance Seeed Studio XIAO ESP32-C3 microcontroller, this board pairs environmental climate telemetry, 6-axis inertial motion tracking, tactile mechanical key switches, and a crystal-clear monochrome OLED interface.

Half life VP, from the project README
From the project README

Main components on the Half life VP

Half life VP bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C3
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push_Dual_x2
SW1, SW2
1
10K
R1

Half life VP design files

The KiCad project lives in the ez-pratham/half-life_VP repository on GitHub; these links point at the commit this page was built from.

Half life VP: common questions

What microcontroller does the Half life VP use?

The Half life VP is built around the XIAO-ESP32-C3, from the ESP32 family.

How big is the Half life VP PCB?

The Half life VP measures 127.5 × 123 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Half life VP?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Half life VP design files?

From the ez-pratham/half-life_VP repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Half life VP design in my own project?

The repository has no license, so all rights stay with ez-pratham. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Half life VP without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards