X68000-midi

fabPlane·x68000-midi·reference/midiori/midiori.kicad_pcb

X68000-midi PCB layout, top view — open source FPGA board by fabPlane

About the X68000-midi PCB

X68000-midi is an open source FPGA PCB design by fabPlane, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 141 × 150 mm, with 41 components from 15 distinct parts.

Its main chip is the ICE40HX1K-VQ100, from the FPGA family. Other key parts include the 74LCX07, AT25SF081-SSHD-X, TLV73312PDBV, SN74LVC8T245DWR and TLV73333PDBV. By type, the board carries 23 capacitors, 11 ICs, 3 connectors, 3 resistors and 1 crystal.

It belongs with the audio and dev boards & breakouts designs in this gallery.

From the project

X68000 MIDI and 8 MB RAM expansion card: Gowin GW1NR-9, YM3802-compatible gateware in Amaranth, and a universal I/O slot breakout. CC0.

1. Remove a cover plate from a free x68000 expansion slot. 2. Slide card into expansion plate until it seats. It will take some force. 3. Install 3d printed cover plate. 4. Attach OUT connector to MIDI in of your synthesizer. 5. (optional) Run LINE OUT from the x68000 to the LINE IN of your synthesizer's internal mixer.

A list of tested games is available here.

Main components on the X68000-midi

X68000-midi bill of materials (BOM)

41 components, 15 distinct parts.

QtyPartRefs
1
74LCX07
U1
1
AT25SF081-SSHD-X
U2
1
TLV73312PDBV
U3
6
SN74LVC8T245DWR
U4, U5, U6, U7, U8, U9
1
ICE40HX1K-VQ100
U10
1
TLV73333PDBV
U11
1
16MHz
X1
1
x68000_expansion
J1
1
Conn_ARM_JTAG_SWD_10
J2
1
Mini-DIN-5
J4
2
4.7uF
C1, C2
20
0.1uF
C3, C4, C5, C6, C7, C9, C10, C11 +12
1
0.1uF
C8
1
10K
R3
2
220
R6, R9

X68000-midi design files

The KiCad project lives in the fabPlane/x68000-midi repository on GitHub; these links point at the commit this page was built from.

X68000-midi: common questions

What microcontroller does the X68000-midi use?

The X68000-midi is built around the ICE40HX1K-VQ100, from the FPGA family.

How big is the X68000-midi PCB?

The X68000-midi measures 141 × 150 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the X68000-midi?

41 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the X68000-midi design files?

From the fabPlane/x68000-midi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the X68000-midi design in my own project?

Yes, under the terms of its CC0-1.0 license, which fabPlane chose for the repository.

Can I test firmware for the X68000-midi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

Similar boards