HyprboardV2

FaizeenHoque·HyprboardV2·PCB/HyprboardV2.kicad_pcb

About the HyprboardV2 PCB

HyprboardV2 is an open source RP2040/RP2350 PCB design by FaizeenHoque, published on GitHub. It is a 2-layer board measuring 21 × 51 mm, with 33 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700X-330XXTT and C2843335. By type, the board carries 17 capacitors, 7 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A better Hyprboard, Minimal RP2040

HyprboardV2 is a compact, RP2040-based development board and the completed successor to the original HyprboardV1 (which never saw the light of day). Built for makers who want a capable, open-source board without the corporate overhead.

Manufactured by JLCPCB · PCB Qty: 5 · Est. Total: $51.7 (+ PCBA)

The Hyprboard V2 uses the RP2040 microcontroller. It supports the Raspberry Pi Pico SDK, MicroPython, and CircuitPython.

HyprboardV2, from the project README — From the project README

Main components on the HyprboardV2

RP2040 MCP1700X-330XXTT C2843335

HyprboardV2 bill of materials (BOM)

33 components, 16 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U1
1	MCP1700X-330XXTT MCP1700x-330xxTT	SOT-23	U2
1	C2843335 W25Q16JVZPIQ TR	Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm	U4
1	C481407 12 MHz	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P	USB_C_Receptacle_HRO_TYPE-C-31-M-12	J1
2	CONN_01X20 Conn_01x20	PinHeader_1x20_P2.54mm_Vertical	J2, J3
1	CONN_01X03 Conn_01x03	PinHeader_1x03_P2.54mm_Vertical	J4
1	SW_Push	SW_Push_SPST_NO_Alps_SKRK	SW1
12	0.1UF 0.1uF	C_0402_1005Metric	C1, C2, C3, C4, C5, C6, C7, C8 +4
1	1UF 1uF	C_0402_1005Metric	C10
2	10UF 10uF	C_0603_1608Metric	C13, C14
2	33PF 33pF	C_0603_1608Metric	C15, C16
2	5.1K	R_0402_1005Metric	R1, R2
2	27	R_0402_1005Metric	R3, R4
2	1K	R_0402_1005Metric	R5, R6
1	10K	R_0402_1005Metric	R7

HyprboardV2 design files

The KiCad project lives in the FaizeenHoque/HyprboardV2 repository on GitHub; these links point at the commit this page was built from.

HyprboardV2: common questions

What microcontroller does the HyprboardV2 use?

The HyprboardV2 is built around the RP2040, from the RP2040/RP2350 family.

How big is the HyprboardV2 PCB?

The HyprboardV2 measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HyprboardV2?

33 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HyprboardV2 design files?

From the FaizeenHoque/HyprboardV2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HyprboardV2 design in my own project?

The repository has no license, so all rights stay with FaizeenHoque. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HyprboardV2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.