20 open source boards using the C2843335
Real designs built with the C2843335, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
PicoROM-32 - ROM Emulator
wickerwaka
40.8 × 17.6 mm57 parts6LMIT332RP2040/RP2350
Upico
dotcypress
36 × 77 mm59 parts6LApache-2.0134RP2040/RP2350
Emberone00
256foundation
128 × 128 mm316 parts6LCERN-OHL-S-2.045RP2040/RP2350
ProjectionBall Unit
meerstern
60 × 60 mm68 parts2LNo license7RP2040/RP2350
Electronics
Project-Stinger
89.8 × 64 mm113 parts4LCustom license4RP2040/RP2350
HyprboardV2
FaizeenHoque
21 × 51 mm33 parts2LNo license3RP2040/RP2350
DevBoard-202
ThongNQ867
30 × 51 mm38 parts2LNo license1RP2040/RP2350
Curly Mini v0
4n3m4i1
44.5 × 20 mm55 parts4LBSD-3-Clause0RP2040/RP2350
PicoCAN
AdrianR3
21 × 51.5 mm51 parts2LNo license0RP2040/RP2350
PicoFlip-X
mavory
21 × 51 mm50 parts2LNo license0RP2040/RP2350
Cuttingboard
rudranshgoel1
21 × 51 mm39 parts2LNo license0RP2040/RP2350
MountPico
AaradhyaBarnwal
26.6 × 51 mm36 parts2LNo license0RP2040/RP2350
Rp2040-usbc dev board
mattkanwisher
21 × 51 mm35 parts2LNo license0RP2040/RP2350
KBoardV1
KaushikDuddala
21 × 51 mm33 parts2LNo license0RP2040/RP2350
Red ducky
Xpandaru
16 × 40 mm30 parts2LNo license0RP2040/RP2350
PicoROM-28 - ROM Emulator
wickerwaka
35.7 × 17.6 mm56 parts6LMIT332RP2040/RP2350
MicrocontrollerInputModule
corndog2000
31 × 111.4 mm337 parts2LCC-BY-NC-4.021RP2040/RP2350
Pi60 v1.1
1upkeyboards
285 × 94.6 mm238 parts2LCC-BY-NC-4.08RP2040/RP2350
PicoROM - ROM Emulator
wickerwaka
42.2 × 17.8 mm53 parts6LMIT332RP2040/RP2350
Super16v3
1upkeyboards
76.2 × 81.6 mm100 parts2LCC-BY-NC-4.08
How designs wire the C2843335
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the C2843335 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 17 of 17 designs, most often 100 nF (then 10 µF).
- The CS pin has a pull-up to 3.3V on 14 of 17 designs, most often 10 kΩ (then 1 kΩ).
- The CS pin has a series resistor on 13 of 17 designs, most often 1 kΩ.
- The EP pin is left unconnected on 11 of 17 designs (GND on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: C2040 82% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
| EPpin 9 | Connected to: Not connected 65% · GND 35% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PicoROM - ROM Emulator by wickerwaka, Upico by dotcypress, Emberone00-pcb by 256foundation and MicrocontrollerInputModule by corndog2000.
The C2843335 in open source designs
The gallery holds 20 open source boards using the C2843335 from 17 GitHub repositories; a typical one measures about 33.4 × 51 mm and carries around 54 components.
65% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is PicoROM-32 - ROM Emulator by wickerwaka.
Parts used alongside the C2843335
Microcontrollers on boards using the C2843335
What boards using the C2843335 are built for
C2843335: common questions
Where can I find a C2843335 reference design?
Each of the 20 boards on this page is a real design using the C2843335. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C2843335 VCC pin?
The VCC pin has a decoupling capacitor on 17 of 17 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 17 open source designs using the C2843335.
What pull-up resistor is used on the C2843335 CS pin?
The CS pin has a pull-up to 3.3V on 14 of 17 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 17 open source designs using the C2843335.
How is the C2843335 EP pin connected?
The EP pin is left unconnected on 11 of 17 designs (GND on 6). Counted from the KiCad layouts of 17 open source designs using the C2843335.
What parts are used alongside the C2843335?
The C2040, C39051, RP2040 and MCP1700x-330xxTT appear in the most repositories here.
Which microcontrollers do boards using the C2843335 use?
Most are built on RP2040/RP2350 (20).
How big is a typical board using the C2843335?
The median is 33.4 × 51 mm, and 65% are two-layer designs.
What is the most popular open source board using the C2843335?
By GitHub stars, PicoROM-32 - ROM Emulator by wickerwaka, with 332 stars.
Can I simulate one of these boards using the C2843335 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.