ESP32-S3 IoT Board
FalcO0O·ESP32-S3_IoT_Board·PCB/esp32.kicad_pcb
About the ESP32-S3 IoT Board
ESP32-S3 IoT Board is an open source ESP32 PCB design by FalcO0O, published on GitHub. It is a 2-layer board measuring 44 × 80.5 mm, with 101 components from 31 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LMR36520ADDAR. By type, the board carries 47 resistors, 16 capacitors, 13 diodes, 10 transistors, 10 connectors and 2 ICs.
It belongs with the iot & wireless designs in this gallery.
From the project
A simple and versatile IO carrier board (PCB) designed to simplify the integration of IoT sensors and actuators with the ESP32S3.
A simple and versatile IO carrier board (PCB) designed to simplify the integration of IoT sensors and actuators with the ESP32S3.
5x JST 2.50mm Ports (4-pin): Convenient connectors for easy peripheral attachment. 2x JST 2.50mm Ports (6-pin): Dedicated bus connectors for I2C, SPI, or other multi-wire protocols. Built-in 3.3V Regulator: High-efficiency converter supporting up to 2A of current. Triple-Mode Pin Configuration: Each control pin can be hardware-configured in three ways to suit your application: 1. Direct to ESP32: For standard 3.3V logic and digital communication. 2. Voltage…

Main components on the ESP32-S3 IoT Board
ESP32-S3 IoT Board bill of materials (BOM)
101 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMR36520ADDAR | Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U3 |
| 10 | AO3400A | SOT-23 | Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 +2 |
| 1 | USB_C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | A0 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | A1 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | A2 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | D0 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | D1 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J7 |
| 1 | USB_VOUT | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8 |
| 1 | PWR_CONN | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J14 |
| 1 | SPI_0 | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J15 |
| 1 | SPI_1 | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J16 |
| 1 | SW_RST | SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | SW_BOOT | SW_SPST_PTS645Sx43SMTR92 | SW2 |
| 2 | SS34 | D_SMB_Handsoldering | D1, D2 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 10 | BAT54S | SOT-23 | D6, D7, D8, D9, D10, D11, D12, D13 +2 |
| 1 | 10uH | L_Chilisin_BMRA00050530 | L1 |
| 10 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C7, C18, C19, C21, C22, C23 +2 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C8, C11 |
| 1 | 2.2uF | C_1206&0805 | C4 |
| 1 | 220nF | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 1 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 5.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 1 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 10 | 220R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14, R21, R22, R29, R30, R37, R38 +2 |
| 30 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16, R17, R18, R19, R20, R23, R24 +22 |
| 1 | 43.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R53 |
ESP32-S3 IoT Board design files
The KiCad project lives in the FalcO0O/ESP32-S3_IoT_Board repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/esp32.kicad_pcb
- SchematicPCB/esp32.kicad_sch
ESP32-S3 IoT Board: common questions
What microcontroller does the ESP32-S3 IoT Board use?
The ESP32-S3 IoT Board is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the ESP32-S3 IoT Board?
The ESP32-S3 IoT Board measures 44 × 80.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-S3 IoT Board?
101 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32-S3 IoT Board design files?
From the FalcO0O/ESP32-S3_IoT_Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32-S3 IoT Board design in my own project?
The repository has no license, so all rights stay with FalcO0O. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-S3 IoT Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k