9 open source boards using the LMR36520ADDAR
Real designs built with the LMR36520ADDAR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ClimateSprinklerController
kbx81
217 × 108 mm189 parts2LNo license55ESP32
Bird3
ysoyjcgoxohxoh
43 × 108 mm61 parts2LMIT8STM32
Diseqc cntrl
getpwnam
90 × 100 mm121 parts4LMIT3STM32
Hub
Bruhdows
148 × 78 mm309 parts4LNo license1STM32
Esc hw rev2
V2gkr
82.6 × 55 mm103 parts6LNo license1STM32
Motor-Controller
WeymenKoo
70 × 70 mm192 parts6LNo license0ESP32
ESP32-S3 IoT Board
FalcO0O
44 × 80.5 mm101 parts2LNo license0Joint controller board rev d power
aliahumanoid
40 × 60 mm40 parts2LGPL-3.012WCH CH32/CH55x
Tile
Bruhdows
68 × 68 mm109 parts4LNo license1
How designs wire the LMR36520ADDAR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LMR36520ADDAR connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 8 of 8 designs, most often 4.7 µF (then 220 nF).
- The VCC pin has a capacitor to GND on 8 of 8 designs, most often 1 µF.
- The SW pin has a series capacitor on 8 of 8 designs, most often 100 nF.
- The FB pin has a resistor to GND on 7 of 8 designs, most often 24.9 kΩ (then 7.15 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PGNDpin 1 | Connected to: GND 100% | — |
| VINpin 2 | Connected to: VDC 75% · a signal 25% |
|
| ENpin 3 | Connected to: VDC 75% · a signal 25% | — |
| FBpin 5 | Connected to: Signal 88% |
|
| VCCpin 6 | Connected to: Signal 100% |
|
| BOOTpin 7 | Connected to: Signal 100% |
|
| SWpin 8 | Connected to: Signal 88% |
|
| PADpin 9 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ClimateSprinklerController by kbx81, Joint controller board rev d power by aliahumanoid, Bird3 by ysoyjcgoxohxoh and Diseqc cntrl by getpwnam.
The LMR36520ADDAR in open source designs
The gallery holds 9 open source boards using the LMR36520ADDAR from 8 GitHub repositories; a typical one measures about 70 × 78 mm and carries around 109 components.
56% use four copper layers or more, and 33% carry an open source license.
The most starred is ClimateSprinklerController by kbx81.
Microcontrollers on boards using the LMR36520ADDAR
What boards using the LMR36520ADDAR are built for
LMR36520ADDAR: common questions
Where can I find a LMR36520ADDAR reference design?
Each of the 9 boards on this page is a real design using the LMR36520ADDAR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LMR36520ADDAR VIN pin?
The VIN pin has a decoupling capacitor on 8 of 8 designs, most often 4.7 µF (then 220 nF). Counted from the KiCad layouts of 8 open source designs using the LMR36520ADDAR.
How is the LMR36520ADDAR VCC pin connected?
The VCC pin has a capacitor to GND on 8 of 8 designs, most often 1 µF. Counted from the KiCad layouts of 8 open source designs using the LMR36520ADDAR.
How is the LMR36520ADDAR SW pin connected?
The SW pin has a series capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the LMR36520ADDAR.
Which microcontrollers do boards using the LMR36520ADDAR use?
Most are built on STM32 (4), ESP32 (3) and WCH CH32/CH55x (1).
How big is a typical board using the LMR36520ADDAR?
The median is 70 × 78 mm, and 44% are two-layer designs.
What is the most popular open source board using the LMR36520ADDAR?
By GitHub stars, ClimateSprinklerController by kbx81, with 55 stars.
Can I simulate one of these boards using the LMR36520ADDAR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.