Aerix core
FBIopeningUPP·aerix-core·hardware/core/core.kicad_pcb
About the Aerix core PCB
Aerix core is an open source STM32 PCB design by FBIopeningUPP, published on GitHub. It is a 8-layer board measuring 29 × 29 mm, with 91 components from 25 distinct parts.
Its main chip is the STM32H743IIKX, from the STM32 family. Other key parts include the IIM-42653, ICM-45686, BMI088, BMP390 and ICP-20100. By type, the board carries 55 capacitors, 14 resistors, 13 ICs, 3 inductors, 2 connectors and 2 LEDs.
It belongs with the sensors designs in this gallery.
From the project
aerix-core
A compact STM32H7 flight controller module.
- STM32H743IIKx - IIM-42653, ICM-45686, and BMI088 IMUs - BMP390 and ICP-20100 barometers - W25Q128JV SPI flash - microSD card - Two CAN transceivers - Buck converter and three 3.3 V LDOs - SWD and two status LEDs - Two board-to-board connectors
This board is still being tested and is not ready for flight.
1. Open the KiCad project. 2. Run ERC and DRC. 3. Check the board for shorts. 4. Power it from a current-limited 3.3 V supply. 5. Connect VTREF, GND, SWDIO, SWCLK, and RESET. 6. Flash the LED test from the firmware guide. 7. Test storage…

Main components on the Aerix core
Aerix core bill of materials (BOM)
91 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H743IIKX STM32H743IIKx | UFBGA-201_10x10mm_Layout15x15_P0.65mm | U1 |
| 1 | IIM-42653 TDK InvenSense(应美盛) | LGA-14_L3.0-W2.5-P0.50-TL | U2 |
| 1 | ICM-45686 TDK InvenSense(应美盛) | LGA-14_L3.0-W2.5-P0.50-TL | U3 |
| 1 | BMI088 Bosch(博世) | LGA-16_L4.5-W3.0-P0.50-BL | U4 |
| 1 | BMP390 BMP390_C5124834 Bosch(博世) | LGA-10_L2.0-W2.0-P0.50-BL | U5 |
| 1 | ICP-20100 TDK InvenSense(应美盛) | LGA-10_L2.0-W2.0-P0.50-TL_ICP-20100 | U6 |
| 1 | W25Q128JVE | WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U7 |
| 2 | TCAN1044AVDRBRQ1 TI(德州仪器) | TDFN-8_L3.0-W3.0-P0.65-BL-EP | U9, U10 |
| 3 | TPS7A2033PDQNR TI(德州仪器) | X2SON-4_L1.0-W1.0-P0.65-TL-EP | U11, U12, U13 |
| 1 | TPSM82822SILR TI(德州仪器) | USIP-10_L2.5-W2.0-P0.50-BL | U14 |
| 1 | ABM8W-16.0000MHZ-8-D1X-T3 ABRACON | CRYSTAL-SMD_4P-L3.2-W2.5-BL-1 | X1 |
| 2 | DF40C-80DS-0.4V(51) DF40C-80DS-0.4V HRS(广濑) | CONN-SMD_DF40C-80DS-0.4V-51 | CN1, CN2 |
| 1 | TF-021B-H265 SOFNG(硕方) | TF-SMD_TF-021B-H265 | Card1 |
| 2 | LED_0402 | LED_0402_1005Metric | LED1, LED2 |
| 3 | 600 | Fuse_0603_1608Metric | FB1, FB2, FB3 |
| 35 | 100NF 100nF | C_0201_0603Metric | C1, C2, C3, C4, C5, C6, C7, C8 +27 |
| 3 | 4.7UF 4.7uF | C_0201_0603Metric | C16, C17, C18 |
| 9 | 1UF 1uF | C_0402_1005Metric | C19, C21, C23, C51, C52, C53, C54, C55 +1 |
| 4 | 2.2UF 2.2uF | C_0402_1005Metric | C25, C26, C29, C32 |
| 2 | 4.7UF 4.7uF | C_0402_1005Metric | C42, C45 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10UF 10uF | C_0603_1608Metric | C49 |
| 1 | 22UF 22uF | C_0603_1608Metric | C50 |
| 7 | 10K 10k | R_0201_0603Metric | R1, R2, R3, R4, R5, R6, R7 |
| 5 | 47K 47k | R_0201_0603Metric | R8, R9, R10, R11, R12 |
| 2 | 1k | R_0201_0603Metric | R13, R14 |
Aerix core design files
The KiCad project lives in the FBIopeningUPP/aerix-core repository on GitHub; these links point at the commit this page was built from.
Aerix core: common questions
What microcontroller does the Aerix core use?
The Aerix core is built around the STM32H743IIKX, from the STM32 family.
How big is the Aerix core PCB?
The Aerix core measures 29 × 29 mm, has 8 copper layers and is 1.6 mm thick.
How many components are on the Aerix core?
91 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Aerix core design files?
From the FBIopeningUPP/aerix-core repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Aerix core design in my own project?
The repository has no license, so all rights stay with FBIopeningUPP. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Aerix core without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k