14 open source boards using the W25Q128JVE

Real designs built with the W25Q128JVE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the W25Q128JVE

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the W25Q128JVE connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC_8 pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 2.2 µF).
CS_1pin 1Connected to: The microcontroller 100%
  • Pull-up to 3.3V on 33% · 10 kΩ (3)
GND_4pin 4Connected to: GND 100%
VCC_8pin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 89% · 100 nF (9), 2.2 µF (3), 1 µF (1)
EP_9pin 9Connected to: GND 67% · not connected 33%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mp3-player by espcaa, HIDMorph by cedarhacks, Project Skyfall by Melih2123 and NoNameComputer-2.0 by PlanAndBuild.

The W25Q128JVE in open source designs

The gallery holds 14 open source boards using the W25Q128JVE from 10 GitHub repositories; a typical one measures about 46 × 53.9 mm and carries around 68 components.

64% use four copper layers or more, and 57% carry an open source license.

The most starred is Mp3-player by espcaa.

Parts used alongside the W25Q128JVE

Microcontrollers on boards using the W25Q128JVE

W25Q128JVE: common questions

Where can I find a W25Q128JVE reference design?

Each of the 14 boards on this page is a real design using the W25Q128JVE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q128JVE VCC_8 pin?

The VCC_8 pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 9 open source designs using the W25Q128JVE.

Which microcontrollers do boards using the W25Q128JVE use?

Most are built on STM32 (5), RP2040/RP2350 (4) and ESP32 (1).

How big is a typical board using the W25Q128JVE?

The median is 46 × 53.9 mm, and 36% are two-layer designs.

What is the most popular open source board using the W25Q128JVE?

By GitHub stars, Mp3-player by espcaa, with 5 stars.

Can I simulate one of these boards using the W25Q128JVE before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part