2 open source boards using the TPS7A2033PDQNR

Real designs built with the TPS7A2033PDQNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TPS7A2033PDQNR in open source designs

The gallery holds 2 open source boards using the TPS7A2033PDQNR from 2 GitHub repositories; a typical one measures about 26.5 × 28.1 mm and carries around 136 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is ExAce Expansion Card Accelerator by cdg66.

Parts used alongside the TPS7A2033PDQNR

Microcontrollers on boards using the TPS7A2033PDQNR

What boards using the TPS7A2033PDQNR are built for

TPS7A2033PDQNR: common questions

Where can I find a TPS7A2033PDQNR reference design?

Each of the 2 boards on this page is a real design using the TPS7A2033PDQNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS7A2033PDQNR use?

Most are built on STM32 (2).

How big is a typical board using the TPS7A2033PDQNR?

The median is 26.5 × 28.1 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS7A2033PDQNR?

By GitHub stars, ExAce Expansion Card Accelerator by cdg66, with 37 stars.

Can I simulate one of these boards using the TPS7A2033PDQNR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part