HardLabs

Zuendbox v3 32

fixxl·el-fueradoro·Schematics_and_Layouts/Zuendbox_v3_32/Zuendbox_v3_32.kicad_pcb

Zuendbox v3 32 PCB layout, top view — open source AVR/Arduino board by fixxl

About the Zuendbox v3 32 PCB

Zuendbox v3 32 is an open source AVR/Arduino PCB design by fixxl, published on GitHub. It is a 2-layer board measuring 213.6 × 127.5 mm, with 153 components from 41 distinct parts.

Its main chip is the ATmega328P-PU, from the AVR/Arduino family. Other key parts include the DM13A, MCP6002-xP, RFM69CW-RF_Module, 74HC595 and XL6009_Module. By type, the board carries 40 diodes, 38 resistors, 37 transistors, 22 capacitors, 13 ICs and 2 connectors.

It belongs with the audio designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

Open source ignition-system for audio-fireworks

This project contains a remotely controlled ignition system for audio-fireworks based on ATmega328P and RFM69CW. Further information (in German) is given in the user manual.

What the system is capable of doing can be seen in our new year's fireworks 2015, new year's fireworks 2016, new year's fireworks 2017, new year's fireworks 2018, and new year's fireworks 2019.

Main components on the Zuendbox v3 32

DM13AMCP6002-xPRFM69CW-RF_ModuleATmega328P-PU74HC595XL6009_ModuleLM1084-3.3MCP2221_IPDS18B20

Zuendbox v3 32 bill of materials (BOM)

153 components, 41 distinct parts.

QtyPartRefs
2
DM13A
U1, U11
1
MCP6002-xP
U2
1
RFM69CW-RF_Module
U3
1
ATmega328P-PU
U4
4
74HC595
U5, U8, U12, U13
1
XL6009_Module
U6
1
LM1084-3.3
U7
1
MCP2221_IP
U9
1
DS18B20
U10
32
IRF3708
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +24
2
BC327
Q33, Q36
2
BC337
Q34, Q37
1
IRF4905
Q35
1
Crystal
Y1
1
USB_B
J1
1
AVR-ISP-10
J2
32
LED
D1, D2, D3, D4, D5, D6, D7, D8 +24
2
1N4148
D33, D40
1
LED_Y
D34
1
LED_O
D35
Show 21 more
QtyPartRefs
1
LED_R
D36
1
LED_G
D37
2
1N4001
D38, D39
15
100n
C1, C2, C4, C5, C6, C9, C10, C13 +7
3
10u
C3, C14, C15
2
15p
C7, C8
2
4m7
C11, C12
2
47k
R1, R31
1
150
R2
1
150k
R3
1
180k
R4
3
100k
R5, R7, R16
1
120k
R6
8
10k
R8, R9, R15, R17, R27, R29, R32, R33
7
1k
R10, R11, R12, R13, R18, R19, R20
1
1M5
R14
6
3k3
R21, R23, R24, R25, R30, R34
1
1k5
R22
1
2R2
R26
1
270
R28
4
R_Network08
RN1, RN2, RN3, RN4

Zuendbox v3 32 design files

The KiCad project lives in the fixxl/el-fueradoro repository on GitHub; these links point at the commit this page was built from.

Zuendbox v3 32: common questions

What microcontroller does the Zuendbox v3 32 use?

The Zuendbox v3 32 is built around the ATmega328P-PU, from the AVR/Arduino family.

How big is the Zuendbox v3 32 PCB?

The Zuendbox v3 32 measures 213.6 × 127.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Zuendbox v3 32?

153 components, from 41 distinct parts. The full bill of materials is listed on this page.

Where can I download the Zuendbox v3 32 design files?

From the fixxl/el-fueradoro repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Zuendbox v3 32 design in my own project?

The repository has no license, so all rights stay with fixxl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Zuendbox v3 32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in el-fueradoro

Earlier revisions in the repo: Zuendbox_v3

Similar boards