Silver
Foalyy·silver-kicad
About the Silver PCB
Silver is an open source Microchip SAM PCB design by Foalyy, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 69 × 31 mm, with 95 components from 36 distinct parts.
Its main chip is the ATSAM4LSxB, from the Microchip SAM family. Other key parts include the TLV70233_SOT23-5, MCP73831-2-OT, LoRa_RFM9x, TPS2112A and TPS22917. By type, the board carries 28 resistors, 27 capacitors, 9 transistors, 8 connectors, 8 switches and 7 diodes.
From the project
Kicad project for the Silver open-source, long-range camera remote control
Silver is an open-source project aiming at making a long-range and fully-featured camera remote control.
See https://silica.io/tag/silver/ for a more detailed build log of the project.
This is the repository of the Kicad project with the schematic and layout of the board. See the main repository at https://github.com/Foalyy/silver-firmware.

Main components on the Silver
Silver bill of materials (BOM)
95 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV70233_SOT23-5 | SOT-23-5 | U1 |
| 1 | MCP73831-2-OT | SOT-23-5 | U2 |
| 1 | ATSAM4LSxB | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | LoRa_RFM9x | HOPERF_RFM9XW_SMD | U4 |
| 1 | TPS2112A | TSSOP-8_4.4x3mm_P0.65mm | U6 |
| 1 | TPS22917 | SOT-23-6_Handsoldering | U7 |
| 1 | Q_PMOS | SOT-23 | Q1 |
| 8 | Q_NMOS | SOT-23 | Q2, Q3, Q5, Q6, Q7, Q8, Q9, Q10 |
| 1 | Crystal_Small | quartz_abs06 | Y1 |
| 1 | Conn_01x02 | JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J2 |
| 1 | Conn_01x05 | JST_SH_SM05B-SRSS-TB_1x05-1MP_P1.00mm_Horizontal | J3 |
| 1 | Conn_01x04 | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | Conn_01x30 | FPC_30 | J5 |
| 1 | Conn_01x02 | antenna_sma_ufl | J6 |
| 2 | jack_trrs_switch | jack_2.5_trrs | P1, P2 |
| 8 | Push | pushbutton | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 3 | RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D5, D7 |
| 1 | GREEN | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | PRTR5V0U2X | SOT-143 | D3 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | BLUE | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | 22uH | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 12 | 100nF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C3, C4, C5, C6, C7, C16, C17 +4 |
| 7 | 10uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C8, C12, C13, C14, C21, C23 |
| 2 | 12pF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C9, C11 |
| 4 | 1uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C10, C15, C18, C19 |
| 1 | 4.7uF 25V | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C24 |
| 1 | 2.2uF 25V | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C25 |
| 3 | 10KR | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R11, R12 |
| 2 | 39R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3 |
| 6 | 470R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5, R10, R20, R23, R24 |
| 11 | 22kR | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7, R8, R9, R13, R14, R15, R16 +3 |
| 1 | 390R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R19 |
| 4 | NM | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R21, R22, R25, R28 |
| 1 | 0R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R26 |
Silver design files
The KiCad project lives in the Foalyy/silver-kicad repository on GitHub; these links point at the commit this page was built from.
- Layoutsilver.kicad_pcb
Silver: common questions
What microcontroller does the Silver use?
The Silver is built around the ATSAM4LSxB, from the Microchip SAM family.
How big is the Silver PCB?
The Silver measures 69 × 31 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Silver?
95 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Silver design files?
From the Foalyy/silver-kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Silver design in my own project?
Yes, under the terms of its GPL-3.0 license, which Foalyy chose for the repository.
Can I test firmware for the Silver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416