4 open source boards using the TCAN1057AVDRQ1
Real designs built with the TCAN1057AVDRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
LARS-Hardware-Interface
CAuDri
86 × 86 mm247 parts6LGPL-3.09STM32
BLDC-FOC
Froggy111
100 × 100 mm121 parts4LNo license1Radxa-CM3-carrier
Froggy111
80 × 100 mm46 parts4LNo license1STM32
EP5 rearbox
NTURacingTeam
149 × 79.5 mm229 parts2LNo license4
The TCAN1057AVDRQ1 in open source designs
The gallery holds 4 open source boards using the TCAN1057AVDRQ1 from 3 GitHub repositories; a typical one measures about 93 × 93 mm and carries around 175 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is LARS-Hardware-Interface by CAuDri.
Parts used alongside the TCAN1057AVDRQ1
Microcontrollers on boards using the TCAN1057AVDRQ1
What boards using the TCAN1057AVDRQ1 are built for
TCAN1057AVDRQ1: common questions
Where can I find a TCAN1057AVDRQ1 reference design?
Each of the 4 boards on this page is a real design using the TCAN1057AVDRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TCAN1057AVDRQ1 use?
Most are built on STM32 (3).
How big is a typical board using the TCAN1057AVDRQ1?
The median is 93 × 93 mm, and 25% are two-layer designs.
What is the most popular open source board using the TCAN1057AVDRQ1?
By GitHub stars, LARS-Hardware-Interface by CAuDri, with 9 stars.
Can I simulate one of these boards using the TCAN1057AVDRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.