Rl fc f405
About the Rl fc f405 PCB
Rl fc f405 is an open source STM32 PCB design by GabuGravin41, published on GitHub. It is a 4-layer board measuring 36 × 36 mm, with 59 components from 34 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the TPS5430DDAR, AP2112K-3.3TRG1, ICM-20602, BMP280 and W25Q128JVSIQ. By type, the board carries 26 capacitors, 12 resistors, 7 ICs, 5 diodes, 4 connectors and 3 inductors.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
There is one custom PCB, the flight controller. The ESC and the receiver are bought as modules. They are represented here only by their connectors, so the cables between the three boards can be checked.
There is one custom PCB, the flight controller. The ESC and the receiver are bought as modules. They are represented here only by their connectors, so the cables between the three boards can be checked.
- Schematic: 61 parts and 79 nets. It matches the design plan 100 % (174 connections). KiCad's own netlister agrees on 79 of 79 nets. - Board: fully routed. KiCad DRC reports 0 errors and 0 unconnected pads, and all 239 pad nets match the plan. Some warnings remain; they are silkscreen only. - Design rules: set for JLCPCB 4-layer, 1.6 mm. See ../../../rlpcb/examples/dronefc/README.md for how…
Main components on the Rl fc f405
Rl fc f405 bill of materials (BOM)
59 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS5430DDAR TPS5430 Texas Instruments | TI_SO-PowerPAD-8_ThermalVias | U1 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 Diodes Inc | SOT-23-5 | U2 |
| 1 | STM32F405RGT6 ST | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | ICM-20602 TDK InvenSense | LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U4 |
| 1 | BMP280 Bosch | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U5 |
| 1 | W25Q128JVSIQ W25Q128JV Winbond | SOIC-8_5.23x5.23mm_P1.27mm | U6 |
| 1 | USBLC6-2SC6 ST | SOT-23-6 | U7 |
| 1 | 8MHZ 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB4105-GF-A USB-C GCT | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | SM08B-SRSS-TB(LF)(SN) ESC JST | JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J3 |
| 1 | SM04B-SRSS-TB(LF)(SN) RX JST | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | SM04B-SRSS-TB(LF)(SN) VTX JST | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J5 |
| 1 | TL3342F160QG BOOT E-Switch | SW_SPST_TL3342 | SW1 |
| 1 | B340A-13-F B340A Diodes Inc | D_SMA | D1 |
| 1 | SMAJ28A-13-F SMAJ28A Diodes Inc | D_SMA | D2 |
| 1 | KT-0603B blue KENTO | LED_0603_1608Metric | D3 |
| 1 | KT-0603G green KENTO | LED_0603_1608Metric | D4 |
| 1 | SS34 MDD | D_SMA | D5 |
| 2 | GZ1608D601TF 600R@100MHz Sunlord | L_0603_1608Metric | FB1, FB2 |
| 1 | SRP7028A-150M 15u Bourns | L_Bourns_SRP7028A_7.3x6.6mm | L1 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CL31A106KBHNNNE 10u 50V Samsung | C_1206_3216Metric | C1, C2 |
| 1 | CL05B103KB5NNNC 10n Samsung | C_0402_1005Metric | C3 |
| 2 | CL21A226MAQNNNE 22u 10V Samsung | C_0805_2012Metric | C4, C5 |
| 2 | CL05A105KA5NQNC 1u Samsung | C_0402_1005Metric | C6, C17 |
| 2 | CL10A475KO8NNNC 4.7u Samsung | C_0603_1608Metric | C7, C14 |
| 12 | CL05B104KO5NNNC 100n Samsung | C_0402_1005Metric | C8, C10, C11, C12, C13, C18, C21, C22 +4 |
| 3 | CL05A225MQ5NSNC 2.2u Samsung | C_0402_1005Metric | C15, C16, C25 |
| 2 | 0402CG180J500NT 18p FH | C_0402_1005Metric | C19, C20 |
| 1 | RNCF0402BKE9K31 9.31k Stackpole | R_0402_1005Metric | R1 |
| 1 | 3.01K 3.01k | R_0402_1005Metric | R2 |
| 3 | 0402WGF1002TCE 10k UNI-ROYAL | R_0402_1005Metric | R3, R5, R10 |
| 3 | 0402WGF1001TCE 1k UNI-ROYAL | R_0402_1005Metric | R4, R6, R7 |
| 2 | 0402WGF4701TCE 4.7k UNI-ROYAL | R_0402_1005Metric | R8, R9 |
| 2 | 0402WGF5101TCE 5.1k UNI-ROYAL | R_0402_1005Metric | R11, R12 |
Rl fc f405 design files
The KiCad project lives in the GabuGravin41/rlcad repository on GitHub; these links point at the commit this page was built from.
Rl fc f405: common questions
What microcontroller does the Rl fc f405 use?
The Rl fc f405 is built around the STM32F405RGT6, from the STM32 family.
How big is the Rl fc f405 PCB?
The Rl fc f405 measures 36 × 36 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Rl fc f405?
59 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rl fc f405 design files?
From the GabuGravin41/rlcad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rl fc f405 design in my own project?
The repository has no license, so all rights stay with GabuGravin41. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rl fc f405 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in rlcad
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k