26 open source boards using the ICM-20602
Real designs built with the ICM-20602, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
XSense
lithiumice
30.8 × 46.9 mm74 parts4LNo license92Upper board
Peize-Liu
50 × 50 mm120 parts2LNo license7ESP32
Launch-Party-Badge-Software
poorawsanhsirk
178 × 110 mm404 parts4LNo license3ESP32
CopterCat cm4
matveylapin
40 × 55 mm156 parts4LApache-2.03STM32
Dragonfly
Broccoliux
66 × 58.8 mm226 parts4LMIT2STM32
Mercury v2.1
Teruru-52
72.8 × 100 mm154 parts2LNo license1STM32
Little drone-
Mariavrgs
66 × 58.8 mm226 parts4LMIT0STM32
Maru x21
donghee
51 × 31.5 mm181 parts4LNo license0STM32
QUT Autopilot Pixracer
Heckus
44.5 × 44.5 mm140 parts4LCustom license0STM32
Kestrel fc
HeyPCB
40 × 40 mm93 parts6LCERN-OHL-S-2.00STM32
NSSFC
Keyaan-07
37 × 37 mm88 parts4LNo license0STM32
UHoubolt PCB GNSS
SpaceTeam
84.9 × 76 mm85 parts4LCERN-OHL-W-2.00Microchip SAM
Neodrone v1
dulatello08
100 × 89 mm75 parts4LNo license0STM32
Rl fc f405.placed
GabuGravin41
36 × 36 mm60 parts4LNo license0STM32
Rl fc f405.placed
GabuGravin41
36 × 36 mm60 parts4LMIT0ESP32
D1(Motherboard)
BenjaminJAnderson
38 × 35 mm51 parts4LMIT0ESP32
Hatchtrack
anarchyincubator
25.9 × 43.5 mm47 parts4LMIT0RP2040/RP2350
Xterminal
lithiumice
33 × 33 mm67 parts2LNo license92STM32
Mercury v2
Teruru-52
72.8 × 100 mm147 parts2LNo license1Microchip SAM
Neodrone v1-noreturn
dulatello08
100 × 89 mm75 parts4LNo license0STM32
Rl fc f405.routed
GabuGravin41
36 × 36 mm60 parts4LMIT0STM32
Rl fc f405
GabuGravin41
36 × 36 mm59 parts4LNo license0STM32
Rl fc f405
GabuGravin41
36 × 36 mm59 parts4LMIT0Color+proximity
VEXU-GHOST
12.6 × 16.5 mm23 parts2LNo license0ESP32
Esp32 icm20602
HeyPCB
30 × 48 mm25 parts4LCERN-OHL-S-2.00Imu
VEXU-GHOST
12.6 × 16.5 mm7 parts2LNo license0
How designs wire the ICM-20602
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the ICM-20602 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 18 of 19 designs, most often 100 nF (then 2.2 µF).
- The REGOUT pin has a capacitor to GND on 18 of 19 designs, most often 100 nF (then 1 µF).
- The VDD pin has a decoupling capacitor on 18 of 19 designs, most often 100 nF (then 2.2 µF).
- The RESV pin is left unconnected on 17 of 19 designs (GND on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDIOpin 1 | Connected to: 3.3V 95% |
|
| RESVpin 7 | Connected to: Not connected 89% | — |
| FSYNCpin 8 | Connected to: GND 84% · not connected 16% | — |
| GNDpin 9, 10, 11, 12, 13, 15 | Connected to: GND 100% | — |
| REGOUTpin 14 | Connected to: Signal 95% |
|
| VDDpin 16 | Connected to: 3.3V 95% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Xterminal by lithiumice, Upper board by Peize-Liu, CopterCat cm4 by matveylapin and Launch-Party-Badge-Software by poorawsanhsirk.
The ICM-20602 in open source designs
The gallery holds 26 open source boards using the ICM-20602 from 19 GitHub repositories; a typical one measures about 39 × 44 mm and carries around 75 components.
77% use four copper layers or more, and 42% carry an open source license.
The most starred is XSense by lithiumice.
Parts used alongside the ICM-20602
Microcontrollers on boards using the ICM-20602
What boards using the ICM-20602 are built for
ICM-20602: common questions
Where can I find a ICM-20602 reference design?
Each of the 26 boards on this page is a real design using the ICM-20602. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ICM-20602 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 18 of 19 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 19 open source designs using the ICM-20602.
How is the ICM-20602 REGOUT pin connected?
The REGOUT pin has a capacitor to GND on 18 of 19 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 19 open source designs using the ICM-20602.
What decoupling capacitors do designs use on the ICM-20602 VDD pin?
The VDD pin has a decoupling capacitor on 18 of 19 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 19 open source designs using the ICM-20602.
What parts are used alongside the ICM-20602?
The BMP280, USBLC6-2SC6, AP2112K-3.3TRG1, STM32F405RGTx and W25Q128JVSIQ appear in the most repositories here.
Which microcontrollers do boards using the ICM-20602 use?
Most are built on STM32 (14), ESP32 (5), RP2040/RP2350 (2) and Microchip SAM (2).
How big is a typical board using the ICM-20602?
The median is 39 × 44 mm, and 23% are two-layer designs.
What is the most popular open source board using the ICM-20602?
By GitHub stars, XSense by lithiumice, with 92 stars.
Can I simulate one of these boards using the ICM-20602 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.