Rl fc f405.placed
About the Rl fc f405.placed PCB
Rl fc f405.placed is an open source STM32 PCB design by GabuGravin41, published on GitHub. It is a 4-layer board measuring 36 × 36 mm, with 60 components from 35 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the TPS5430, AP2112K-3.3, ICM-20602, BMP280 and W25Q128JV. By type, the board carries 26 capacitors, 12 resistors, 7 ICs, 5 connectors, 5 diodes and 3 inductors.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
There is one custom PCB, the flight controller. The ESC and the receiver are bought as modules. They are represented here only by their connectors, so the cables between the three boards can be checked.
There is one custom PCB, the flight controller. The ESC and the receiver are bought as modules. They are represented here only by their connectors, so the cables between the three boards can be checked.
- Schematic: 61 parts and 79 nets. It matches the design plan 100 % (174 connections). KiCad's own netlister agrees on 79 of 79 nets. - Board: fully routed. KiCad DRC reports 0 errors and 0 unconnected pads, and all 239 pad nets match the plan. Some warnings remain; they are silkscreen only. - Design rules: set for JLCPCB 4-layer, 1.6 mm. See ../../../rlpcb/examples/dronefc/README.md for how…
Main components on the Rl fc f405.placed
Rl fc f405.placed bill of materials (BOM)
60 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS5430 | TI_SO-PowerPAD-8_ThermalVias | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | STM32F405RGT6 | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | ICM-20602 | LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U4 |
| 1 | BMP280 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U5 |
| 1 | W25Q128JV | SOIC-8_5.23x5.23mm_P1.27mm | U6 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U7 |
| 1 | 8MHZ 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | C3020560 USB-C | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | C160407 ESC | JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J3 |
| 1 | C160404 RX | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | C160404 VTX | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J5 |
| 1 | SWD | PinHeader_1x04_P1.27mm_Vertical | J6 |
| 1 | C2886898 BOOT | SW_SPST_TL3342 | SW1 |
| 1 | B340A | D_SMA | D1 |
| 1 | SMAJ28A | D_SMA | D2 |
| 1 | C2288 blue | LED_0603_1608Metric | D3 |
| 1 | C12624 green | LED_0603_1608Metric | D4 |
| 1 | SS34 | D_SMA | D5 |
| 2 | C1002 600R@100MHz | L_0603_1608Metric | FB1, FB2 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 15U 15u | L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 2 | C13585 10u 50V | C_1206_3216Metric | C1, C2 |
| 1 | 10N 10n | C_0402_1005Metric | C3 |
| 2 | C45783 22u 10V | C_0805_2012Metric | C4, C5 |
| 2 | 1u | C_0402_1005Metric | C6, C17 |
| 2 | 4.7U 4.7u | C_0603_1608Metric | C7, C14 |
| 12 | 100N 100n | C_0402_1005Metric | C8, C10, C11, C12, C13, C18, C21, C22 +4 |
| 3 | 2.2U 2.2u | C_0402_1005Metric | C15, C16, C25 |
| 2 | 18P 18p | C_0402_1005Metric | C19, C20 |
| 1 | 9.31K 9.31k | R_0402_1005Metric | R1 |
| 1 | 3.01K 3.01k | R_0402_1005Metric | R2 |
| 3 | 10K 10k | R_0402_1005Metric | R3, R5, R10 |
| 3 | 1k | R_0402_1005Metric | R4, R6, R7 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R8, R9 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R11, R12 |
Rl fc f405.placed design files
The KiCad project lives in the GabuGravin41/rlcad repository on GitHub; these links point at the commit this page was built from.
Rl fc f405.placed: common questions
What microcontroller does the Rl fc f405.placed use?
The Rl fc f405.placed is built around the STM32F405RGT6, from the STM32 family.
How big is the Rl fc f405.placed PCB?
The Rl fc f405.placed measures 36 × 36 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Rl fc f405.placed?
60 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rl fc f405.placed design files?
From the GabuGravin41/rlcad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Rl fc f405.placed design in my own project?
The repository has no license, so all rights stay with GabuGravin41. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rl fc f405.placed without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in rlcad
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k