My pcdu v1
GachuhiWachira·CubeSat·LibreCube PCDU/My version/src/electrical/my_pcdu_v1.kicad_pcb
About the My pcdu v1 PCB
My pcdu v1 is an open source PCB design by GachuhiWachira, published on GitHub. It is a 4-layer board measuring 90.2 × 95.9 mm, with 131 components from 42 distinct parts.
Other key parts include the TPS2034, TPS61023DRL, BQ24032ARHLRG4 and TPS61232DRCR. By type, the board carries 46 capacitors, 32 resistors, 21 diodes, 16 ICs, 8 connectors and 4 inductors.
It belongs with the power & battery and science & space designs in this gallery.
From the project
Various CubeSat components and schematics.
This is a basic Power Conditioning and Distribution Unit (PCDU) that implements a full redundancy scheme and adheres to the LibreCube board specification. The main features are:
- Input connectors for up to six solar cells (in configurations for up to 5 Volt) - Conditioning of input power (linear energy transfer mode) - Two Li-Ion batteries integrated on board - Charge and discharge circuitry for batteries, depending on solar input and load - Main power switch that disconnects all electrical loads from solar cell input and batteries - Stable 5 Volt output power to attached loads - Four…

Main components on the My pcdu v1
My pcdu v1 bill of materials (BOM)
131 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | TPS2034 | SO-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4 |
| 6 | TPS2034 | SO-8_3.9x4.9mm_P1.27mm | U5, U6, U7, U8, U13, U14 |
| 2 | TPS61023DRL TPS61023DRLR | DRL0006A | U9, U10 |
| 2 | BQ24032ARHLRG4 | IC_MSP430FR2522IRHLR | U11, U12 |
| 2 | TPS61232DRCR | VREG_TPS61232DRCR | U15, U16 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Horizontal | J1, J2 |
| 4 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Horizontal | J3, J4, J5, J6 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | CONN_01X02 USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J8 |
| 2 | Battery_Cell | BatteryHolder_Keystone_1042_1x18650 | BT1, BT2 |
| 2 | CONN_02X26 ESQ-126-39-x-D | PinHeader_2x26_P2.54mm_Vertical | H1, H2 |
| 16 | D_Schottky | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 2 | Red | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D13, D15 |
| 2 | Green | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D14, D16 |
| 1 | LED | D_0805_2012Metric | D19 |
| 4 | 6.8UH 1uH | L_Coilcraft_XAL4040-XXX | L1, L2, L3, L4 |
| 10 | 0.1UF 0.1uF | C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 9 | 0.1uF | C_0805_2012Metric | C9, C10, C11, C12, C13, C14, C15, C16 +1 |
| 4 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C18, C20, C31 |
| 1 | 220UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 220UF 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21, C23 |
| 6 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22, C24, C41, C42, C43, C44 |
| 1 | 220UF 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C25 |
| 3 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C26, C27, C28 |
| 2 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29, C32 |
| 1 | 2.2UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30 |
| 1 | 2.2UF 0.1uF | C_0805_2012Metric | C33 |
| 2 | 0.1UF 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C37, C38 |
| 1 | 10UF 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C39 |
| 1 | 2.2UF 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C40 |
| 1 | 10UF 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C45 |
| 1 | 0.22UF 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C46 |
| 9 | 1M | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 3 | 1.5K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R13 |
| 2 | 1.5K 750k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12 |
| 5 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R17, R18, R19, R22 |
| 4 | 1k5 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16, R20, R21 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24 |
| 2 | 820Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R26 |
| 2 | 37k4 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R28 |
| 1 | 1.5k | R_0805_2012Metric | R29 |
| 2 | 5.1k | R_0805_2012Metric | R31, R32 |
My pcdu v1 design files
The KiCad project lives in the GachuhiWachira/CubeSat repository on GitHub; these links point at the commit this page was built from.
My pcdu v1: common questions
How big is the My pcdu v1 PCB?
The My pcdu v1 measures 90.2 × 95.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the My pcdu v1?
131 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the My pcdu v1 design files?
From the GachuhiWachira/CubeSat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the My pcdu v1 design in my own project?
The repository has no license, so all rights stay with GachuhiWachira. Use it as a reference, and ask the author before reusing the design.
More boards in CubeSat
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k