Pcdu
GachuhiWachira·CubeSat·LibreCube PCDU/LibreCube_Original/src/electrical/pcdu.kicad_pcb
About the Pcdu PCB
Pcdu is an open source PCB design by GachuhiWachira, published on GitHub. It is a 2-layer board measuring 90.2 × 95.9 mm, with 102 components from 20 distinct parts.
Other key parts include the TPS2034, TPS61032 and BQ24002. By type, the board carries 30 capacitors, 25 diodes, 20 resistors, 12 ICs, 7 connectors and 4 inductors.
It belongs with the power & battery and science & space designs in this gallery.
From the project
Various CubeSat components and schematics.
This is a basic Power Conditioning and Distribution Unit (PCDU) that implements a full redundancy scheme and adheres to the LibreCube board specification. The main features are:
- Input connectors for up to six solar cells (in configurations for up to 5 Volt) - Conditioning of input power (linear energy transfer mode) - Two Li-Ion batteries integrated on board - Charge and discharge circuitry for batteries, depending on solar input and load - Main power switch that disconnects all electrical loads from solar cell input and batteries - Stable 5 Volt output power to attached loads - Four…

Main components on the Pcdu
Pcdu bill of materials (BOM)
102 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | TPS2034 | SO-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4, U24, U25 |
| 4 | TPS61032 | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm | U22, U23, U26, U33 |
| 2 | BQ24002 bq24002 | HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.85x4mm | U31, U34 |
| 6 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Horizontal | J3, J4, J5, J6, J7, J8 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 2 | Battery_Cell | BatteryHolder_Keystone_1042_1x18650 | BT1, BT2 |
| 2 | CONN_02X26 | ESQ-126-39-x-D | H1, H2 |
| 16 | D_Schottky | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 9 | LED | D_0805_2012Metric | D17, D18, D19, D20, D25, D26, D27, D28 +1 |
| 4 | 6.8UH 6.8uH | L_10.4x10.4_H4.8 | L1, L2, L3, L4 |
| 12 | 0.1UF 0.1uF | C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
| 4 | 220UF 220uF | CP_EIA-7343-31_Kemet-D | C19, C21, C23, C25 |
| 8 | 10UF 10uF | C_0805_2012Metric | C29, C32, C39, C45, C48, C50, C53, C56 |
| 4 | 2.2UF 2.2uF | C_0805_2012Metric | C30, C33, C40, C51 |
| 2 | 0.22UF 0.22uF | C_0805_2012Metric | C46, C54 |
| 5 | 1M | R_0805_2012Metric | R1, R2, R3, R4, R8 |
| 9 | 1.5K 1.5k | R_0805_2012Metric | R9, R10, R11, R12, R13, R55, R56, R65 +1 |
| 2 | 309K 309k | R_0805_2012Metric | R50, R60 |
| 2 | 110K 110k | R_0805_2012Metric | R51, R61 |
| 2 | 0.1 | R_1206_3216Metric | R52, R62 |
Pcdu design files
The KiCad project lives in the GachuhiWachira/CubeSat repository on GitHub; these links point at the commit this page was built from.
Pcdu: common questions
How big is the Pcdu PCB?
The Pcdu measures 90.2 × 95.9 mm, has 2 copper layers and is 1.5748 mm thick.
How many components are on the Pcdu?
102 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pcdu design files?
From the GachuhiWachira/CubeSat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pcdu design in my own project?
The repository has no license, so all rights stay with GachuhiWachira. Use it as a reference, and ask the author before reusing the design.
More boards in CubeSat
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k