HardLabs

DormRadar TX

gancaokuai·dorm-radar-pcb·hardware/kicad/DormRadar/release/TX/DormRadar_TX.kicad_pcb

DormRadar TX PCB layout, top view — open source ESP32 board by gancaokuai

About the DormRadar TX PCB

DormRadar TX is an open source ESP32 PCB design by gancaokuai, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 70 × 42 mm, with 23 components from 17 distinct parts.

Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the AP2112K-3.3TRG1 and MT3608. By type, the board carries 10 capacitors, 4 resistors, 3 ICs, 3 connectors, 1 fuse and 1 diode.

From the project

ESP32-C3 radar PCB with TX and RX boards, KiCad sources, Gerbers and manufacturing files

防宿管雷达 PCB 发布说明 日期: 2026-09-12 KiCad: 10.0.6

板卡: - TX: 70 mm x 42 mm, 包含 LD2450 接口和 ESP-NOW 发射端 - RX: 68 mm x 42 mm, 仅包含 ESP-NOW 接收端和 LED

设计要点: - ESP32-C3-WROOM-02 天线区悬出板边，减少 PCB 尺寸并保持天线净空 - 1S 18650 电池输入，无充电功能 - MT3608 升压到 5V - AP2112K-3.3 给 ESP32 供电 - 双层板，底层 GND 铺铜 - Freerouting 2.4.1 自动布线，单线程模式 - 最终 DRC: 0 个未连接焊盘，0 个电气错误，剩余仅为丝印边缘提示

生产文件: - TX/gerber, TX/drill, TX/position - RX/gerber, RX/drill, RX/position - BOMcommon.csv - TX/DormRadarTX.kicadpcb - RX/DormRadarRX.kicad_pcb

Main components on the DormRadar TX

ESP32-C3-WROOM-02-N4AP2112K-3.3TRG1MT3608

DormRadar TX bill of materials (BOM)

23 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-WROOM-02-N4
ESP32-C3-WROOM-02
ESPRESSIF
U1
1
AP2112K-3.3TRG1
AP2112K-3.3
DIODES
U2
1
MT3608
XI'AN Aerosemi Tech
U3
1
B2P-VH-B(LF)(SN)
BAT_1S
JST
J1
1
PZ127V-11-05-H25
LD2450
XFCN
J2
1
PZ254V-11-05P
PROG
XFCN
J3
1
0466002.NRHF
2A
Littelfuse
F1
1
SS34
MDD
D1
1
SMDRI127-220MT
22uH
Shun Xiang Nuo
L1
1
CL32A107MPVNNNE
100uF/10V
Samsung Electro-Mechanics
C1
2
CL31A226KAHNNNE
22uF/10V
Samsung Electro-Mechanics
C2, C3
2
CL10B104KB8NNNC
0.1uF
Samsung Electro-Mechanics
C4, C8
3
CL21B105KBFNNNE
1uF
Samsung Electro-Mechanics
C5, C6, C9
1
CL31A226KQHNNNE
22uF/6.3V
Samsung Electro-Mechanics
C7
1
CL21A106KAYNNNE
10uF/10V
Samsung Electro-Mechanics
C10
1
AC0805FR-0773K2L
73.2k
YAGEO
R1
3
RC0805FR-0710KL
10k
YAGEO
R2, R3, R4

DormRadar TX design files

The KiCad project lives in the gancaokuai/dorm-radar-pcb repository on GitHub; these links point at the commit this page was built from.

DormRadar TX: common questions

What microcontroller does the DormRadar TX use?

The DormRadar TX is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.

How big is the DormRadar TX PCB?

The DormRadar TX measures 70 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DormRadar TX?

23 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DormRadar TX design files?

From the gancaokuai/dorm-radar-pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the DormRadar TX design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which gancaokuai chose for the repository.

Can I test firmware for the DormRadar TX without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in dorm-radar-pcb

Similar boards