ESP32 CustomBoard
ganqrr-crypto·ESP32_CustomBoard·Board/esp_32_board.kicad_pcb
About the ESP32 CustomBoard PCB
ESP32 CustomBoard is an open source ESP32 PCB design by ganqrr-crypto, published on GitHub under the MIT license. It is a 2-layer board measuring 72.5 × 36 mm, with 24 components from 16 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6 and AMS1117-3.3. By type, the board carries 7 connectors, 5 capacitors, 5 resistors, 3 ICs, 2 switches and 2 diodes.
It belongs with the iot & wireless designs in this gallery.
From the project
This is a ESP32 custom board project that i made/i am making for Half Life by Hack club
This is a ESP32 custom board project that i made/i am making for Half Life by Hack club
This Board uses the ESP32-S3-WROOM1-N8 as the microcontroller and it featuresan app on windows that lets you turn on a led and off..
BOM: BOM can be found in the folder "Manufacturing" ## Bill of Materials (BOM)
Main components on the ESP32 CustomBoard
ESP32 CustomBoard bill of materials (BOM)
24 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | UART | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | JTAG | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 4 | Conn_01x06_Pin | PinSocket_1x06_P2.54mm_Vertical | J4, J5, J6, J8 |
| 1 | RESET | SW_SPST_TL3305A | SW2 |
| 1 | SW_Push | SW_SPST_TL3305A | SW3 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3 |
| 1 | 22uF | CP_EIA-3216-18_Kemet-A_HandSolder | C1(Tantalum)1 |
| 1 | 10uF | CP_EIA-3216-18_Kemet-A_HandSolder | C1(Tantalum)2 |
| 2 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 1 | 10uF C1(Tantalum) | CP_EIA-3216-18_Kemet-A_HandSolder | C9 |
| 4 | 5k1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R8, R10 |
| 1 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
ESP32 CustomBoard design files
The KiCad project lives in the ganqrr-crypto/ESP32_CustomBoard repository on GitHub; these links point at the commit this page was built from.
- LayoutBoard/esp_32_board.kicad_pcb
- SchematicBoard/esp_32_board.kicad_sch
ESP32 CustomBoard: common questions
What microcontroller does the ESP32 CustomBoard use?
The ESP32 CustomBoard is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the ESP32 CustomBoard PCB?
The ESP32 CustomBoard measures 72.5 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32 CustomBoard?
24 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32 CustomBoard design files?
From the ganqrr-crypto/ESP32_CustomBoard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32 CustomBoard design in my own project?
Yes, under the terms of its MIT license, which ganqrr-crypto chose for the repository.
Can I test firmware for the ESP32 CustomBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k