Kicad document generator
gargsrishtii·kicad-document-generator
About the Kicad document generator PCB
Kicad document generator is an open source ESP32 PCB design by gargsrishtii, published on GitHub. It is a 2-layer board measuring 81 × 50 mm, with 20 components from 15 distinct parts.
Its main chip is the ESP32-DEVKITC-VE, from the ESP32 family. Other key parts include the RYLR998. By type, the board carries 7 capacitors, 6 connectors, 5 resistors and 2 ICs.
Main components on the Kicad document generator
Kicad document generator bill of materials (BOM)
20 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RYLR998 | RYLR998_Castellated_5P | U1 |
| 1 | ESP32-DEVKITC-VE | ESP32-DEVKITC-VE | U2 |
| 1 | Berg13Pins | PinHeader_1x13_P2.54mm_Vertical | J1 |
| 1 | Berg10Pins | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | 1.3 inches_OLED | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | JST Input Power | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 1 | JST_3PIN_2.54MM | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | Led_Panel | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | 10uF | C_0805_2012Metric | C1 |
| 1 | 47uF | C_0805_2012Metric | C2 |
| 2 | 100uF | CP_Radial_D5.0mm_P2.50mm | C3, C4 |
| 3 | 100nF | C_0805_2012Metric | C6, C7, C8 |
| 1 | 10K | R_0805_2012Metric | R2 |
| 1 | 470ohm | R_0805_2012Metric | R3 |
| 3 | 330ohm | R_0805_2012Metric | R4, R5, R6 |
Kicad document generator design files
The KiCad project lives in the gargsrishtii/kicad-document-generator repository on GitHub; these links point at the commit this page was built from.
- LayoutProject1.kicad_pcb
- SchematicProject1.kicad_sch
Kicad document generator: common questions
What microcontroller does the Kicad document generator use?
The Kicad document generator is built around the ESP32-DEVKITC-VE, from the ESP32 family.
How big is the Kicad document generator PCB?
The Kicad document generator measures 81 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad document generator?
20 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad document generator design files?
From the gargsrishtii/kicad-document-generator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicad document generator design in my own project?
The repository has no license, so all rights stay with gargsrishtii. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kicad document generator without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k