7 open source boards using the ESP32-DEVKITC-VE
Real designs built with the ESP32-DEVKITC-VE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Fujinet devkit shield
djtersteegc
99.1 × 55.9 mm40 parts2LCERN-OHL-S-2.022ESP32
FujiNet ADAM Devkit SMD
djtersteegc
57.8 × 55.4 mm39 parts2LCERN-OHL-S-2.03ESP32
Kicad document generator
gargsrishtii
81 × 50 mm20 parts2LNo license0ESP32
TankSync-RX
gargsrishtii
81 × 50 mm20 parts2LCERN-OHL-P-2.00ESP32
FujiNet ADAM Devkit Mini
djtersteegc
27.9 × 55.4 mm36 parts2LCERN-OHL-S-2.03ESP32
CoCo FujiNet
strickyak
87.4 × 55.4 mm27 parts2LMIT4ESP32
ESP Interface Board
LeoWatti99
69 × 86 mm21 parts2LGPL-3.00
How designs wire the ESP32-DEVKITC-VE
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-DEVKITC-VE connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3 pin is tied to 3.3V on 6 of 6 designs.
- The IO14 pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ.
- The EN pin is left unconnected on 5 of 6 designs.
- The SD2 pin is left unconnected on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 1 | Connected to: 3.3V 100% | — |
| ENpin 2 | Connected to: Not connected 83% · a signal 17% | — |
| SENSOR_VPpin 3 | Connected to: Not connected 67% · a signal 33% | — |
| SENSOR_VNpin 4 | Connected to: Not connected 67% · a signal 33% |
|
| IO34pin 5 | Connected to: A connector 67% · not connected 17% |
|
| IO35pin 6 | Connected to: A connector 50% · not connected 17% |
|
| IO32pin 7 | Connected to: A connector 67% · not connected 17% |
|
| IO33pin 8 | Connected to: A connector 83% |
|
| IO14pin 12 | Connected to: A connector 83%, RYLR998 33% |
|
| GND1pin 14 | Connected to: GND 100% | — |
| IO13pin 15 | Connected to: A connector 67% |
|
| SD2pin 16 | Connected to: Not connected 83% · a signal 17% | — |
| SD3pin 17 | Connected to: Not connected 83% · a signal 17% | — |
| CMDpin 18 | Connected to: Not connected 83% · a signal 17% | — |
| EXT_5Vpin 19 | Connected to: 5V 67% · not connected 33% | — |
| SD0pin 21 | Connected to: Not connected 83% · a signal 17% | — |
| IO15pin 23 | Connected to: Not connected 50% · a signal 50% |
|
| IO2pin 24 | Connected to: Not connected 50% · a signal 50% |
|
| IO0pin 25 | Connected to: A connector 67% · not connected 17% |
|
| IO4pin 26 | Connected to: A connector 33% · GND 33% |
|
| IO16pin 27 | Connected to: A connector 67% · not connected 33% |
|
| IO17pin 28 | Connected to: A connector 67% · not connected 33% |
|
| IO5pin 29 | Connected to: A connector 100% |
|
| IO19pin 31 | Connected to: A connector 67% · not connected 33% |
|
| GND2pin 32 | Connected to: GND 67% · a signal 33% | — |
| IO21pin 33 | Connected to: A connector 33% · not connected 33% |
|
| IO23pin 37 | Connected to: A connector 67% · not connected 33% |
|
| GND3pin 38 | Connected to: GND 67% · not connected 33% | — |
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fujinet devkit shield by djtersteegc, CoCo FujiNet by strickyak, FujiNet ADAM Devkit Mini by djtersteegc and Kicad document generator by gargsrishtii.
The ESP32-DEVKITC-VE in open source designs
The gallery holds 7 open source boards using the ESP32-DEVKITC-VE from 6 GitHub repositories; a typical one measures about 81 × 55.3 mm and carries around 27 components.
100% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.
The most starred is Fujinet devkit shield by djtersteegc.
Parts used alongside the ESP32-DEVKITC-VE
Microcontrollers on boards using the ESP32-DEVKITC-VE
What boards using the ESP32-DEVKITC-VE are built for
ESP32-DEVKITC-VE: common questions
Where can I find a ESP32-DEVKITC-VE reference design?
Each of the 7 boards on this page is a real design using the ESP32-DEVKITC-VE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-DEVKITC-VE 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-DEVKITC-VE.
What pull-up resistor is used on the ESP32-DEVKITC-VE IO14 pin?
The IO14 pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the ESP32-DEVKITC-VE.
How is the ESP32-DEVKITC-VE EN pin connected?
The EN pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-DEVKITC-VE.
Which microcontrollers do boards using the ESP32-DEVKITC-VE use?
Most are built on ESP32 (7).
How big is a typical board using the ESP32-DEVKITC-VE?
The median is 81 × 55.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP32-DEVKITC-VE?
By GitHub stars, Fujinet devkit shield by djtersteegc, with 22 stars.
Can I simulate one of these boards using the ESP32-DEVKITC-VE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.