Esp32 mini
Gedankenn·esp32_mini
About the Esp32 mini PCB
Esp32 mini is an open source ESP32 PCB design by Gedankenn, published on GitHub. It is a 2-layer board measuring 37.5 × 35.5 mm, with 23 components from 12 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 10 capacitors, 6 resistors, 2 ICs, 2 connectors, 2 switches and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
my esp32-mini
Author: Fabio Slika Stella Target MCU: ESP32-C3-MINI-1-N4 Purpose: Compact ESP32-C3 development board with USB-C power, onboard 3.3 V regulation, boot/reset buttons, status LED, and breakout header.
The schematic was saved by KiCad 10, so it needs KiCad 10 or newer to open. Symbols come from the KiCad PCM SparkFun libraries plus project-specific ESP32-C3-MINI-1-N4 and AMS1117-3.3 symbols. No Gerbers, BOM export or firmware are included in the repository.
Main components on the Esp32 mini
Esp32 mini bill of materials (BOM)
23 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1-N4 | XCVR_ESP32-C3-MINI-1-N4 | U1 |
| 1 | AMS1117-3.3 | SOT229P700X180-4N | U6 |
| 1 | Conn_01x11 | 1x11_P2.54mm | J1 |
| 1 | USB_C_Receptacle | USB-C_16 | J3 |
| 2 | SMD_4.6x2.8mm_h2.5mm | Push_SMD_4.6x2.8mm_h2.5mm | SW1, SW2 |
| 1 | Green | LED_1206_3216Metric_Green | D1 |
| 3 | 10uF | C_0603_1608Metric | C1, C5, C7 |
| 6 | 0.1uF | C_0402_1005Metric | C2, C3, C4, C6, C8, C9 |
| 1 | 10uF | C_0402_1005Metric | C15 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 180 | R_0603_1608Metric | R3 |
| 3 | 10k | R_0603_1608Metric | R4, R5, R6 |
Esp32 mini design files
The KiCad project lives in the Gedankenn/esp32_mini repository on GitHub; these links point at the commit this page was built from.
- Layoutesp32-mini.kicad_pcb
- Schematicesp32-mini.kicad_sch
Esp32 mini: common questions
What microcontroller does the Esp32 mini use?
The Esp32 mini is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How big is the Esp32 mini PCB?
The Esp32 mini measures 37.5 × 35.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32 mini?
23 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32 mini design files?
From the Gedankenn/esp32_mini repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32 mini design in my own project?
The repository has no license, so all rights stay with Gedankenn. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32 mini without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k