WaveWise PMIC
About the WaveWise PMIC PCB
WaveWise PMIC is an open source RP2040/RP2350 PCB design by GenerateNU, published on GitHub. It is a 4-layer board measuring 88.9 × 80 mm, with 60 components from 43 distinct parts.
Its main chip is the Raspberry Pi Pico, from the RP2040/RP2350 family. Other key parts include the LV14360PDDAR, Pololu_DRV8711_Motor_Driver and LM2576HVS-5.0_NOPB. By type, the board carries 26 resistors, 10 connectors, 7 capacitors, 4 ICs, 3 diodes and 2 inductors.
Main components on the WaveWise PMIC
WaveWise PMIC bill of materials (BOM)
60 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LV14360PDDAR | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | IC1 |
| 1 | Raspberry Pi Pico | Pico | U1 |
| 1 | Pololu_DRV8711_Motor_Driver | POLOLU_36v4 | U2 |
| 1 | LM2576HVS-5.0_NOPB | TO-263-5_TabPin6 | U4 |
| 1 | 2N2219 | TO-92_Inline_Wide | Q2 |
| 1 | 5031590200 | Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J1 |
| 1 | Conn_01x06_Pin | 61300611121 | J2 |
| 1 | Conn_01x03_Pin | 61300311121 | J3 |
| 1 | 5031590400 | Molex_Micro-Fit_3.0_43650-0400_1x04_P3.00mm_Horizontal | J5 |
| 1 | 5031590400 | Molex_MicroClasp_55932-0410_1x04_P2.00mm_Vertical | J6 |
| 1 | 5031590800 | Molex_MicroClasp_55932-0810_1x08_P2.00mm_Vertical | J8 |
| 1 | 5031590300 | Molex_MicroClasp_55932-0310_1x03_P2.00mm_Vertical | J9 |
| 2 | 5031590200 | Molex_MicroClasp_55932-0210_1x02_P2.00mm_Vertical | J10, J11 |
| 1 | Screw_Terminal_01x03 | CONN_1731734_PXC | J13 |
| 2 | TestPoint | TestPoint_THTPad_D2.0mm_Drill1.0mm | 3V1, GND1 |
| 1 | 5V TP | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | 5V1 |
| 1 | 24V TP | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | 24V_1 |
| 2 | TestPoint | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | BatteryV1, PanelV1 |
| 1 | AWHSH105D00G | AWHSH105D00G | K1 |
| 1 | 1N5822 | D_DO-201AD_P15.24mm_Horizontal | D1 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | SBR10200CTL-13 | TO-252DPAK_DIO | D3 |
| 1 | 100u | L_12x12mm_H6mm | L1 |
| 1 | 27u | L_12x12mm_H6mm | L3 |
| 1 | 100u/80V | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 1uF/100V | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 2.2u/100V | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C4 |
| 1 | 100n/25V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 1000u/10V | CP_Radial_D10.0mm_P5.00mm | C6 |
| 1 | 560p/50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 120u/50V | CP_Radial_D8.0mm_P5.00mm | C9 |
| 1 | 340k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 20k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 500k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 17k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 45.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 316k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 50 | R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R7 |
| 1 | 5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 10.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 15 | 0 | R_0805_2012Metric | R10, R11, R12, R13, R14, R15, R16, R18 +7 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
WaveWise PMIC design files
The KiCad project lives in the GenerateNU/WaveWise-SP24-ECE repository on GitHub; these links point at the commit this page was built from.
WaveWise PMIC: common questions
What microcontroller does the WaveWise PMIC use?
The WaveWise PMIC is built around the Raspberry Pi Pico, from the RP2040/RP2350 family.
How big is the WaveWise PMIC PCB?
The WaveWise PMIC measures 88.9 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the WaveWise PMIC?
60 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the WaveWise PMIC design files?
From the GenerateNU/WaveWise-SP24-ECE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the WaveWise PMIC design in my own project?
The repository has no license, so all rights stay with GenerateNU. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the WaveWise PMIC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in WaveWise-SP24-ECE
Similar boards
RP2040/RP2350Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1k
RP2040/RP2350Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Corne
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0k
RP2040/RP2350Jitx design
55.5 × 65 mm26 parts4LGPL-3.05.0k
RP2040/RP2350Main
google
98 × 71 mm102 parts2LApache-2.02.9k