HardLabs

WaveWise Submersible

GenerateNU·WaveWise-SP24-ECE·production/wavewise-ecad/WaveWise_Submersible/WaveWise_Submersible.kicad_pcb

WaveWise Submersible PCB layout, top view — open source RP2040/RP2350 board by GenerateNU

About the WaveWise Submersible PCB

WaveWise Submersible is an open source RP2040/RP2350 PCB design by GenerateNU, published on GitHub. It is a 4-layer board measuring 114.3 × 63.5 mm, with 66 components from 34 distinct parts.

Its main chip is the Raspberry Pi Pico, from the RP2040/RP2350 family. Other key parts include the ADS1115IDGSR, KP234XTMA1, SI8600AC-B-ISR, EZO_pH_Circuit and EZO_Conductivity_Circuit. By type, the board carries 25 resistors, 15 capacitors, 11 connectors, 8 ICs, 2 inductors and 1 transistor.

Main components on the WaveWise Submersible

ADS1115IDGSRKP234XTMA1SI8600AC-B-ISREZO_pH_CircuitEZO_Conductivity_CircuitRaspberry Pi PicoAZ1117CH-3.3TRG1

WaveWise Submersible bill of materials (BOM)

66 components, 34 distinct parts.

QtyPartRefs
1
ADS1115IDGSR
U1
1
KP234XTMA1
U2
2
SI8600AC-B-ISR
U3, U5
1
EZO_pH_Circuit
U4
1
EZO_Conductivity_Circuit
U6
1
Raspberry Pi Pico
U9
1
AZ1117CH-3.3TRG1
U10
1
2N2219
Q2
3
SMA_CONNECTOR
J1, J2, J4
1
Conn_01x04_Pin
J3
1
55932-0210
J6
1
55935-0810
J7
1
Conn_01x07_Pin
J8
1
55932-0310
J9
1
Conn_01x03_Pin
J10
1
55935-0610
J11
1
Conn_01x06_Pin
J13
1
AWHSH105D00G
K2
2
RFM-0505S
PS1, PS2
1
1N5817
D2
Show 14 more
QtyPartRefs
2
22u
L1, L2
3
1u
C1, C4, C17
2
100nF
C2, C3
2
0.1u
C5, C6
1
10u
C9
4
330p
C10, C13, C14, C16
1
22u
C11
2
6.8u
C12, C15
12
0
R1, R3, R8, R10, R11, R15, R22, R23 +4
9
10k
R2, R4, R5, R7, R12, R13, R19, R20 +1
1
22k
R6
1
50
R9
1
1k
R14
1
5k
R17

WaveWise Submersible design files

The KiCad project lives in the GenerateNU/WaveWise-SP24-ECE repository on GitHub; these links point at the commit this page was built from.

WaveWise Submersible: common questions

What microcontroller does the WaveWise Submersible use?

The WaveWise Submersible is built around the Raspberry Pi Pico, from the RP2040/RP2350 family.

How big is the WaveWise Submersible PCB?

The WaveWise Submersible measures 114.3 × 63.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the WaveWise Submersible?

66 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the WaveWise Submersible design files?

From the GenerateNU/WaveWise-SP24-ECE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the WaveWise Submersible design in my own project?

The repository has no license, so all rights stay with GenerateNU. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the WaveWise Submersible without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in WaveWise-SP24-ECE

Similar boards