Planetary bean bouncer
geodave810·planetary-bean-bouncer·PBB_ESP32_S3/KiCad/ESP32-44_PBB_Group12/ESP32-44_PBB_Group12.kicad_pcb
About the Planetary bean bouncer PCB
Planetary bean bouncer is an open source ESP32 PCB design by geodave810, published on GitHub. It is a 2-layer board measuring 99.6 × 89.8 mm, with 17 components from 15 distinct parts.
Its main chip is the ESP32-S3-DEVKITC-1-N8R8, from the ESP32 family. By type, the board carries 13 connectors, 3 capacitors and 1 IC.
It belongs with the displays & leds designs in this gallery.
From the project
Open-source DIY coffee roaster based on an 8-cup flour sifter with stationary heat gun
An open-source DIY coffee roaster built around an 8-cup stainless steel flour sifter, a planetary gear-driven agitator, and a stationary heat gun. The Planetary Bean Bouncer combines 3D-printed mechanical components, readily available hardware, and custom electronics to create an affordable small-batch coffee roasting platform.
The Planetary Bean Bouncer (PBB) is a small-batch coffee roaster designed around a modified stainless steel flour sifter. A planetary gear mechanism drives the agitator, continuously moving the beans while heat is applied by a stationary heat gun.

Main components on the Planetary bean bouncer
Planetary bean bouncer bill of materials (BOM)
17 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DEVKITC-1-N8R8 | ESP32-S3-DEVKITC-1-N8R8 | U1 |
| 1 | TFT_Touch_SD | PinSocket_1x14_P2.54mm_Vertical | J1 |
| 1 | RTC | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | SHT31 | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | EC11 | PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | Buzzer | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Limit | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | X_Motor | PinHeader_1x05_P2.54mm_Vertical | J7 |
| 1 | Y_Motor | PinHeader_1x05_P2.54mm_Vertical | J8 |
| 1 | MAX6675_2 | PinSocket_1x05_P2.54mm_Horizontal_Mirrored | J9 |
| 1 | MAX6675 | PinSocket_1x05_P2.54mm_Horizontal_Mirrored | J10 |
| 2 | Conn_01x22 | PinHeader_1x22_P2.54mm_Vertical | J11, J13 |
| 1 | Conn_01x22 | ESP32_22_PadsOnly | J12 |
| 1 | 22 µF | C_1210_3225Metric | C1 |
| 2 | 0.1 µF | C_1206_3216Metric | C2, C3 |
Planetary bean bouncer design files
The KiCad project lives in the geodave810/planetary-bean-bouncer repository on GitHub; these links point at the commit this page was built from.
Planetary bean bouncer: common questions
What microcontroller does the Planetary bean bouncer use?
The Planetary bean bouncer is built around the ESP32-S3-DEVKITC-1-N8R8, from the ESP32 family.
How big is the Planetary bean bouncer PCB?
The Planetary bean bouncer measures 99.6 × 89.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Planetary bean bouncer?
17 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Planetary bean bouncer design files?
From the geodave810/planetary-bean-bouncer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Planetary bean bouncer design in my own project?
The repository has no license, so all rights stay with geodave810. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Planetary bean bouncer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k