9 open source boards using the ESP32-S3-DEVKITC-1-N8R8

Real designs built with the ESP32-S3-DEVKITC-1-N8R8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the ESP32-S3-DEVKITC-1-N8R8

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-S3-DEVKITC-1-N8R8 connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3 pins is tied to 3.3V on 75% of them (not connected on 2).
  • The 5V pins is tied to 5V on 3 of 4 designs.
  • The GPIO35 pins is left unconnected on 3 of 4 designs.
  • The GPIO36 pins is left unconnected on 3 of 4 designs.
3V3pin 1, 2, J1-1, J1-2Connected to: 3.3V 75% · not connected 25%
RSTpin 3Connected to: Not connected 67% · a signal 33%
GPIO4/ADC1_3pin 4Connected to: Signal 100%
  • Pull-up to BATT on 67% · 4.7 kΩ (1)
  • Resistor to GND on 67% · 10 kΩ (1)
GPIO17/ADC2_6/U1TXDpin 10Connected to: Signal 67% · not connected 33%
  • Resistor to GND on 67% · 10 kΩ (1)
GPIO8/ADC1_7pin 12Connected to: Signal 100%
  • Resistor to GND on 67% · 100 kΩ (1)
  • Series resistor on 67% · 520 Ω (1), 100 kΩ (1)
GPIO46/LOGpin 14Connected to: Not connected 67% · a signal 33%
GPIO10/CS0(FSPICS0)pin 16Connected to: Signal 100%
  • Pull-up to 3.3V on 67% · 10 kΩ (2)
5Vpin 21, J1-21Connected to: 5V 75% · not connected 25%
GNDpin 22, 23, 24, 44, J1-22, J3-1, J3-21, J3-22Connected to: GND 94%
GPIO35pin 32, J3-13Connected to: Not connected 75% · a signal 25%
GPIO36pin 33, J3-12Connected to: Not connected 75% · a signal 25%
GPIO37pin 34, J3-11Connected to: Not connected 75% · a signal 25%
RGB_LED/GPIO38pin 35Connected to: Not connected 100%
MTDO/GPIO40pin 37Connected to: Not connected 67% · a signal 33%
ADC1_0/GPIO1pin 41Connected to: Not connected 67% · a signal 33%
U0RXD/GPIO44pin 42Connected to: Not connected 67% · a signal 33%
3V3_J1_1pin J1_1Connected to: 3.3V 100%
GND2_J3_22pin J3_22Connected to: GND 100%

66 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Planetary bean bouncer by geodave810, Linefollowingrobot by msafeerhassan, ESP32-Balancing module v2 by louisbabeschneider and Esp32-ecu by markthebault.

The ESP32-S3-DEVKITC-1-N8R8 in open source designs

The gallery holds 9 open source boards using the ESP32-S3-DEVKITC-1-N8R8 from 9 GitHub repositories; a typical one measures about 125 × 92.4 mm and carries around 31 components.

67% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.

The most starred is Planetary bean bouncer by geodave810.

Microcontrollers on boards using the ESP32-S3-DEVKITC-1-N8R8

ESP32-S3-DEVKITC-1-N8R8: common questions

Where can I find a ESP32-S3-DEVKITC-1-N8R8 reference design?

Each of the 9 boards on this page is a real design using the ESP32-S3-DEVKITC-1-N8R8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-S3-DEVKITC-1-N8R8 3V3 pin connected?

The 3V3 pins is tied to 3.3V on 75% of them (not connected on 2). Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-DEVKITC-1-N8R8.

How is the ESP32-S3-DEVKITC-1-N8R8 5V pin connected?

The 5V pins is tied to 5V on 3 of 4 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-DEVKITC-1-N8R8.

How is the ESP32-S3-DEVKITC-1-N8R8 GPIO35 pin connected?

The GPIO35 pins is left unconnected on 3 of 4 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-DEVKITC-1-N8R8.

Which microcontrollers do boards using the ESP32-S3-DEVKITC-1-N8R8 use?

Most are built on ESP32 (9).

How big is a typical board using the ESP32-S3-DEVKITC-1-N8R8?

The median is 125 × 92.4 mm, and 67% are two-layer designs.

What is the most popular open source board using the ESP32-S3-DEVKITC-1-N8R8?

By GitHub stars, Planetary bean bouncer by geodave810, with 2 stars.

Can I simulate one of these boards using the ESP32-S3-DEVKITC-1-N8R8 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part