GBSCSI2 DB25 Pico
GeorgeRudolf·GBSCSI2·EDA/DB25_Pico/GBSCSI2_DB25_Pico.kicad_pcb
About the GBSCSI2 DB25 Pico PCB
GBSCSI2 DB25 Pico is an open source RP2040/RP2350 PCB design by GeorgeRudolf, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 53 × 31 mm, with 86 components from 32 distinct parts.
Its main chip is the RP235X_60QFN, from the RP2040/RP2350 family. Other key parts include the 74LVTH245, 74LVTH125, SN74AHC1G125DBVR, TLV62569DBV and AZ1117-2.85. By type, the board carries 46 resistors, 17 capacitors, 8 ICs, 5 diodes, 4 connectors and 2 fuses.
It belongs with the retro computing designs in this gallery.
From the project
Affordable SCSI Disk Emulator - upgrade over the original GBSCSI
NOTE: Above all, these boards were initially designed as a hack to satisfy my own personal needs. With that said, they've been tested fairly extensively. Please read this entire README.
Herein are the design files for all variants of GBSCSI2 in KiCad 7 format, being migrated to KiCad 9. The hardware in this repository is licensed CERN OHL-S V2, the full terms of which can be found at https://ohwr.org/cernohlsv2.pdf and https://ohwr.org/cernohlsv2.txt.
Main components on the GBSCSI2 DB25 Pico
GBSCSI2 DB25 Pico bill of materials (BOM)
86 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP235X_60QFN Pico(2(W)) | RPi_Pico_W_SMD | U1 |
| 2 | 74LVTH245 | SSOP-20_5.3x7.2mm_P0.65mm | U4, U5 |
| 2 | 74LVTH125 | TSSOP-14_4.4x5mm_P0.65mm | U6, U7 |
| 1 | SN74AHC1G125DBVR | SOT-23-5 | U8 |
| 1 | TLV62569DBV | SOT-23-5 | U9 |
| 1 | AZ1117-2.85 | SOT-223-3_TabPin2 | U10 |
| 1 | SCSI_50-2P_2MM DB25_Plug | DSUB-25_Male_EdgeMount_P2.77mm | J1 |
| 1 | TF003 | TF01A | J2 |
| 1 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Horizontal | J5 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 2 | C468888 1A | Fuse_0805_2012Metric | F1, F2 |
| 2 | JUMPER_2_OPEN Jumper_2_Open | PinHeader_2x01_P2.54mm_Vertical | JP1, JP2 |
| 1 | SW_DIP_x03 | SW_DIP_SPSTx03_Slide_6.7x9.18mm_W8.61mm_P2.54mm_LowProfile | SW2 |
| 4 | 1N5819 | D_SOD-123 | D1, D2, D3, D4 |
| 1 | C72038 YELLOW | LED_0603_1608Metric | D5 |
| 1 | C5832356 1μH | L_1008_2520Metric | L2 |
| 3 | C96446 10μF | C_0603_1608Metric | C7, C29, C30 |
| 2 | C96123 47μF | C_1206_3216Metric | C20, C35 |
| 1 | 12PF 12pF | C_0603_1608Metric | C21 |
| 7 | 100NF 100nF | C_0603_1608Metric | C22, C23, C24, C25, C26, C32, C33 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C23733 4.7μF | C_0402_1005Metric | C27 |
| 1 | 100NF 100nF | C_0402_1005Metric | C28 |
| 2 | C15849 1μF | C_0603_1608Metric | C31, C34 |
| 14 | 4.7kΩ | R_0603_1608Metric | R5, R6, R7, R8, R9, R10, R11, R12 +6 |
| 4 | 1k | R_0603_1608Metric | R13, R14, R17, R55 |
| 19 | 110Ω | R_0603_1608Metric | R25, R31, R32, R33, R34, R35, R36, R37 +11 |
| 4 | 1kΩ | R_0603_1608Metric | R26, R27, R28, R30 |
| 1 | 10kΩ | R_0402_1005Metric | R49 |
| 1 | 442kΩ | R_0402_1005Metric | R50 |
| 1 | 100kΩ | R_0402_1005Metric | R51 |
| 1 | 0Ω | R_0603_1608Metric | R52 |
| 1 | N/A ~ | R_0603_1608Metric | R53 |
GBSCSI2 DB25 Pico design files
The KiCad project lives in the GeorgeRudolf/GBSCSI2 repository on GitHub; these links point at the commit this page was built from.
GBSCSI2 DB25 Pico: common questions
What microcontroller does the GBSCSI2 DB25 Pico use?
The GBSCSI2 DB25 Pico is built around the RP235X_60QFN, from the RP2040/RP2350 family.
How big is the GBSCSI2 DB25 Pico PCB?
The GBSCSI2 DB25 Pico measures 53 × 31 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the GBSCSI2 DB25 Pico?
86 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GBSCSI2 DB25 Pico design files?
From the GeorgeRudolf/GBSCSI2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GBSCSI2 DB25 Pico design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which GeorgeRudolf chose for the repository.
Can I test firmware for the GBSCSI2 DB25 Pico without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in GBSCSI2
RP2040/RP2350
GBSCSI2 2.5N 235x
GeorgeRudolf
69.5 × 93.6 mm141 parts4LCERN-OHL-S-2.015RP2040/RP2350
GBSCSI2 DB25 2354A
GeorgeRudolf
53 × 31 mm118 parts4LCERN-OHL-S-2.015RP2040/RP2350
GBSCSI2 2.5SCA TH 235x
GeorgeRudolf
69.5 × 93.6 mm106 parts4LCERN-OHL-S-2.015RP2040/RP2350
GBSCSI Common Platform - 2.5 Narrow, Pico
GeorgeRudolf
69.5 × 93.6 mm105 parts4LCERN-OHL-S-2.015
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k