7 open source boards using the SN74AHC1G125DBVR

Real designs built with the SN74AHC1G125DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

The SN74AHC1G125DBVR in open source designs

The gallery holds 7 open source boards using the SN74AHC1G125DBVR from 4 GitHub repositories; a typical one measures about 69.5 × 93.6 mm and carries around 118 components.

100% use four copper layers or more, and 57% carry an open source license.

The most starred is GBSCSI2 2.5N 235x by GeorgeRudolf.

Parts used alongside the SN74AHC1G125DBVR

Microcontrollers on boards using the SN74AHC1G125DBVR

What boards using the SN74AHC1G125DBVR are built for

SN74AHC1G125DBVR: common questions

Where can I find a SN74AHC1G125DBVR reference design?

Each of the 7 boards on this page is a real design using the SN74AHC1G125DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SN74AHC1G125DBVR use?

Most are built on RP2040/RP2350 (5) and ESP32 (2).

How big is a typical board using the SN74AHC1G125DBVR?

The median is 69.5 × 93.6 mm, and 0% are two-layer designs.

What is the most popular open source board using the SN74AHC1G125DBVR?

By GitHub stars, GBSCSI2 2.5N 235x by GeorgeRudolf, with 15 stars.

Can I simulate one of these boards using the SN74AHC1G125DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part