Continous servo
georgesleen·continous-servo-pcb·servo-control-board/enph259-servo.kicad_pcb
About the Continous servo PCB
Continous servo is an open source PCB design by georgesleen, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 95.3 × 56.5 mm, with 52 components from 27 distinct parts.
Other key parts include the 74HC14, 74LS393, 74HC273, 74HC245 and LM741. By type, the board carries 18 resistors, 14 capacitors, 9 diodes, 6 ICs, 2 transistors and 1 module.
It belongs with the robotics & motion designs in this gallery.
From the project
PCB for a continous rotation servo
Based on the final project from ENPH259. I've extended the project by creating a PCB and mechanical mount for the project.
I've also included an optional 'speed readout' on the board itself. This displays the current revolutions per cycle of the servo in binary.
By using slots in a disk attached to the motor shaft, I can monitor the rotational speed of the motor. This can then be fed into a counter that resets periodically, and is latched right before every reset. This digital number is then put through an R2R DAC, which is then compared with a reference voltage and fed into a PI…
Main components on the Continous servo
Continous servo bill of materials (BOM)
52 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC14 | DIP-14_W7.62mm_Socket | U1 |
| 1 | 74LS393 | DIP-14_W7.62mm_Socket | U2 |
| 1 | 74HC273 | DIP-20_W7.62mm_Socket | U3 |
| 1 | 74HC245 | DIP-20_W7.62mm_Socket | U4 |
| 2 | LM741 | DIP-8_W7.62mm_Socket | U5, U6 |
| 1 | Motor_DC | PinSocket_1x02_P2.54mm_Vertical | M1 |
| 1 | MJF122 | TO-220-3_Vertical | Q1 |
| 1 | EE-SX1041 | PinSocket_1x04_P2.54mm_Vertical | Q2 |
| 1 | AD3 In | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | 10K 10k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 8 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D9 |
| 2 | 1NF 1nF | C_Rect_L7.0mm_W2.5mm_P5.00mm | C1, C13 |
| 1 | 47PF 47pF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 8 | 100NF 100nF | C_Rect_L7.0mm_W2.5mm_P5.00mm | C3, C4, C5, C6, C8, C9, C10, C14 |
| 1 | 1UF 1uF | C_Rect_L10.3mm_W5.0mm_P7.50mm_MKS4 | C7 |
| 2 | 100UF 100uF | CP_Radial_D6.3mm_P2.50mm | C11, C12 |
| 2 | 11K 11k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2 |
| 1 | 4610X-R2R-103LF | R_Array_SIP10 | R3 |
| 8 | 1k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4, R5, R6, R7, R8, R9, R10, R11 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1M | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R12 |
| 1 | 680K 680k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R13 |
| 1 | 10K 10k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R14 |
| 1 | 22K 22k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R15 |
| 1 | 10R, 3W | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R16 |
| 1 | 330R | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R17 |
| 1 | 4.7K 4.7k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R18 |
Continous servo design files
The KiCad project lives in the georgesleen/continous-servo-pcb repository on GitHub; these links point at the commit this page was built from.
Continous servo: common questions
How big is the Continous servo PCB?
The Continous servo measures 95.3 × 56.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Continous servo?
52 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Continous servo design files?
From the georgesleen/continous-servo-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Continous servo design in my own project?
Yes, under the terms of its GPL-3.0 license, which georgesleen chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979