34 open source boards using the 74HC273
Real designs built with the 74HC273, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
8 16 computer 2
halfburnttoast
208 × 110 mm111 parts2LNo license21AVR/Arduino
TCPU8-Alpha
halfburnttoast
150 × 150 mm138 partsGPL-2.04Cosmac toy v2
kanpapa
72 × 95 mm56 parts2LNo license4Driver
m24h
136 × 52 mm113 parts2LNo license3Internal sdcard interface
ifilot
219 × 88 mm77 parts2LNo license3SF68
scefrom
271.8 × 147.3 mm122 parts4LCustom license2Retro clock tmct
tmct-web
245 × 240 mm255 parts2LNo license1Isa sdcard
ifilot
104.4 × 82.7 mm46 parts4LNo license1Philips P2000T Memory Expansion 2Mb+
ifilot
200.5 × 67.7 mm31 parts2LNo license1V1c
KITTY-6502
234 × 100 mm134 parts2LNo license0Excalibur64
Cptscorcher
209 × 175 mm125 parts2LGPL-3.00NLP VGA
cherry-takuan
117.5 × 99.7 mm66 parts2LNo license0Continous servo
georgesleen
95.3 × 56.5 mm52 parts4LGPL-3.00Philips P2000T SD-CARD SLOT2 cartridge
ifilot
85.1 × 100 mm62 parts4LNo license36502 Flash Cart
acwright
81.8 × 57.6 mm17 parts2LCERN-OHL-P-2.03V0d-2048-32
smaldragon
90 × 56.8 mm24 parts2LUnlicense2Prototype
ifilot
151.6 × 82.7 mm45 parts2LNo license1V2a
KITTY-6502
234 × 100 mm134 parts2LNo license0Spi master
nrivard
76.2 × 43.2 mm12 parts2LMIT10Tinyboard blinkenlight
ifilot
43.2 × 63.5 mm14 parts2LGPL-3.05Sdcard prototype
ifilot
82.6 × 67.3 mm34 parts2LNo license3RackZ80 - Processor Board
jkreucher
160 × 100 mm39 parts2LGPL-3.02Philips P2000T Memory Expansion 1Mb+
ifilot
110 × 68.1 mm23 parts2LNo license1V2b
KITTY-6502
234 × 100 mm134 parts2LNo license0FPGA
Alu
jerry-kerenzikov
100 × 51.9 mm78 parts4LCERN-OHL-S-2.00V1b
KITTY-6502
234 × 100 mm133 parts2LNo license08-bit register
jerry-kerenzikov
100 × 51.9 mm65 parts4LCERN-OHL-S-2.00V1a
KITTY-6502
234 × 87.3 mm129 parts2LNo license0Output register
ifilot
101.6 × 55.9 mm30 parts2LCERN-OHL-S-2.02V0c
KITTY-6502
234 × 87.3 mm119 parts2LNo license0Instruction register
jerry-kerenzikov
100 × 31.6 mm27 parts4LCERN-OHL-S-2.00General purpose registers
ifilot
101.6 × 27.9 mm23 parts2LCERN-OHL-S-2.02General purpose register halfsize
ifilot
48.3 × 27.9 mm22 parts2LCERN-OHL-S-2.02Lcd display
ifilot
101.6 × 55.9 mm12 parts2LCERN-OHL-S-2.02
How designs wire the 74HC273
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the 74HC273 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 15 of 20 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: 5V 100% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8 16 computer 2 by halfburnttoast, Spi master by nrivard, Tinyboard blinkenlight by ifilot and TCPU8-Alpha by halfburnttoast.
The 74HC273 in open source designs
The gallery holds 34 open source boards using the 74HC273 from 20 GitHub repositories; a typical one measures about 113.7 × 82.7 mm and carries around 59 components.
79% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is 8 16 computer 2 by halfburnttoast.
Parts used alongside the 74HC273
Microcontrollers on boards using the 74HC273
What boards using the 74HC273 are built for
74HC273: common questions
Where can I find a 74HC273 reference design?
Each of the 34 boards on this page is a real design using the 74HC273. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC273 VCC pin?
The VCC pin has a decoupling capacitor on 15 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the 74HC273.
What parts are used alongside the 74HC273?
The 74HC245, 74HC74, 74HC00, 74HC138 and 74HC32 appear in the most repositories here.
Which microcontrollers do boards using the 74HC273 use?
Most are built on AVR/Arduino (1) and FPGA (1).
How big is a typical board using the 74HC273?
The median is 113.7 × 82.7 mm, and 79% are two-layer designs.
What is the most popular open source board using the 74HC273?
By GitHub stars, 8 16 computer 2 by halfburnttoast, with 21 stars.
Can I simulate one of these boards using the 74HC273 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.