Logic noise synth
GitWorz·logic-noise-synth·kicad/circuits_son.kicad_pcb
About the Logic noise synth PCB
Logic noise synth is an open source PCB design by GitWorz, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 42 components from 17 distinct parts.
Other key parts include the 741, 74HC14 and 74HC595. By type, the board carries 14 resistors, 11 diodes, 8 capacitors, 3 ICs and 1 connector.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
Polyphonic logic-gate synthesizer (74HC14 + 74HC595): breadboard, Tinkercad, soldered V1 and KiCad V2 PCB
Polyphonic logic-gate synthesizer built during the Logic Noise Workshop (ESILV, Circuits course). Square-wave oscillators made from a 74HC14 Schmitt-trigger hex inverter are sequenced by a 74HC595 shift register, mixed, amplified and played through a speaker/piezo.
1. How it works 2. Reference circuit 3. Breadboard prototypes 4. Hand-drawn circuits & oscilloscope captures 5. Tinkercad breadboard diagram & schematic 6. Soldered synth (V1) 7. KiCad V2 — PCB with new functionality 8. Bill of materials 9. Repository structure 10. References

Main components on the Logic noise synth
Logic noise synth bill of materials (BOM)
42 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 741 | DIP-8_W7.62mm | U2 |
| 1 | 74HC14 | DIP-14_W7.62mm | U3 |
| 1 | 74HC595 | DIP-16_W7.62mm | U4 |
| 1 | 3V3 / GND | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Piezo | Buzzer_12x9.5RM7.6 | PIEZO1 |
| 4 | 10k | Potentiometre_RM-065_Vertical | RPOT2, RPOT3, RPOT4, RPOT5 |
| 6 | YELLOW | LED_D5.0mm | D1, D2, D7, D8, D10, D11 |
| 2 | RED | LED_D5.0mm | D3, D4 |
| 1 | GREEN | LED_D5.0mm | D5 |
| 2 | BLUE | LED_D5.0mm | D6, D9 |
| 1 | 33u | CP_Radial_D5.0mm_P2.50mm | C2 |
| 3 | 22u | CP_Radial_D5.0mm_P2.50mm | C3, C6, C7 |
| 2 | 220u | CP_Radial_D6.3mm_P2.50mm | C4, C5 |
| 2 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C8, C9 |
| 3 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 9 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R7, R8, R10, R11, R13 +1 |
| 2 | 47 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R12 |
Logic noise synth design files
The KiCad project lives in the GitWorz/logic-noise-synth repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/circuits_son.kicad_pcb
- Schematickicad/circuits_son.kicad_sch
Logic noise synth: common questions
How big is the Logic noise synth PCB?
The Logic noise synth measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Logic noise synth?
42 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Logic noise synth design files?
From the GitWorz/logic-noise-synth repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Logic noise synth design in my own project?
The repository has no license, so all rights stay with GitWorz. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k